www.ecoxgear.
Quick Start POWER + CONNECT 1 Open Cap on the side of your EcoEdge Pro 2 Turn on the Main Power Switch 3 On the Top Panel, Press the Standby Power Button to power on your EcoEdge Pro 4 Search your Bluetooth Connection on your Smart Device 5 Pair & Play the original owner who purchases the unit from an authorized dealer. Transfers do not qualify for warranty protection. Grace Digital reserves the right to replace any out-of-stock or discontinued product with a comparable product.
6) AVOID prolonged exposure to ultraviolet radiation (UV sunlight) and strong magnetic fields. 7) Periodically check the rubber seal for premature wear. 8) Periodically clean the rubber with a soft moist cloth and ensure no objects such as dirt, hair, or sand are on the rubber seal ring. Do NOT use any oily solvent or chemicals for cleaning. 9) Rinse off the unit with tap water after use in salt water or swimming pool.
Control Buttons & Operations On/Off Press the Standby Power Button once to power On/Off. IMPORTANT: Standby Power Button function will NOT operate when the Master Power Switch is set to the OFF position. Master Power Switch under the cap on the Side Panel must be set ON for Standby & your EcoEdge Pro to operate. Bluetooth Once turned on, the EcoEdge Pro will search for your Bluetooth. Refer to Set Up Recommendations 1-2-3 part 3 for details.
You should always 1) Use the ECOXGEAR speaker in accordance with any music or noise rules and regulations. 2) Use the proper ECOXGEAR mounts if you intend to mount the unit. 3) Properly seal the ECOXGEAR prior and after each use when in humid or water environments to avoid water damage to the internal components. Salt water / air is particularly corrosive. Always make sure that the gaskets are sealed when in salt water environment and the unit properly rinsed off after use.
Track Selection Press button once to select Previous Song track & Next Song track . Play/Pause/ Answer/EcoTalk Press button once to pause or play song tracks. When receiving an incoming phone call, press button once to answer. Press button again to hang up. You can also PRESS AND HOLD to reject an incoming call. PRESS AND HOLD the button for two seconds to activate the voice assistant on your device (Siri, Hey Google, etc.).
water, clean it thoroughly after use with fresh water. The USB cables and unit with an improperly fitted cap are NOT waterproof. To prevent fire or shock, do NOT attempt to charge this unit if it is wet or you suspect water has entered the unit. In this situation, please return the unit to Grace Digital for a free assessment. If we have found that the unit has carried water, we will repair or replace the unit free of charge. SAFETY ADVISORY & WARNING: Read and follow all instructions. Use only as intended.
3: Music Sync 1 – 360° flashing to beat with color changing LEDs 4: Music Sync 2 - Vertical flashing to beat with color changing LEDs 5: Music Sync 3 - Rotating flashing to beat with color changing LEDs 6: Music Sync 4 - Horizontal flashing to beat with color changing LEDs 7: Music Sync 5 - Dancing to beat with color changing LEDs 8: Music Sync 6 - Rotating to beat with color changing LEDs 9: Music Sync 7 - Randomly rotating to beat with color changing LEDs 10: Solid Red receiver is connected, consult the
FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
When turned on, the SOLID GREEN LED above the Power Button indicates Power Status. Connect USB-C Input, under the Power + Connect Cap, to a power source. The LED next to indicates USB connection Charging Status. RED: Charge in process GREEN: Full charge complete When you turn on the EcoEdge Pro, the BLUE LED above the Bluetooth Button indicates Bluetooth Status. FLASHING: Ready to pair SOLID: Bluetooth connection successful Refer to Set Up Recommendations 1-2-3 for additional details.
Mount Attachment Point ¼” diameter EcoCast Using Qualcomm® Broadcast Audio technology EcoCast Range 30 ft / 9.1 m between Casting speaker and Receiving speakers Charging Options USB-C cable to USB outlet, to 5V AC adapter, or to Computer Charging Time Approximately 5-6 hours Recommended Storage (Battery) Temperature 59°F / 15°C Operating Temperature 23°F to 104°F / -5°C to 40°C Waterproof/Dustproof Rating IP67 Transmitting Mode, and EcoCast Receiving Mode.
Set Up Recommendations 1-2-3 1 Charge Your EcoEdge Pro Prior to First Use For best performance, fully charge your EcoEdge Pro before you turn it on for the first time. Connect the USB-C port to the USB cable and a 5V power source. Charge the unit until the LED Charging Status Indicator and all four Battery Level Indicators are SOLID GREEN, indicating a full charge. NOTE: The LED Charging Status Indicator will only turn on while the EcoEdge Pro is connected to a 5V power source.
Specifications Unit Dimensions 5.40” Approximately 5-6 hours of charging is required from a low to a full charge. Power source options include the USB connection to your computer or a power outlet using a 5V USB to AC power adapter. It is recommended to always use the USB cable included with your EcoEdge Pro. 2 Power On, Battery, & LED Status Indicators 5.43” 2.27” Bottle Opener Mount Attachment Point Once fully charged, press the Standby Power Button on the top of your EcoEdge Pro.
“EcoCast Receiving,” or if the Mode Status Indicator shines RED or GREEN, when the speaker is turned on, press the EcoCast Button to cycle through each Mode until you hear the voice prompt, “Speaker Mode” and the Mode Status Indicator turns BLUE. IMPORTANT: Make sure that the Main Power Switch, located on the Side Panel, is set to the ON position. If the switch is in the OFF position, your EcoEdge Pro will not be able to turn on using the Standby Power Button.
Audio AUX-IN Connect an audio device using the 3.5mm cable connection as an alternative to a Bluetooth connection to your EcoEdge Pro. NOTE: Volume level must be controlled from the audio device when connected to the AUX-IN connection. USB-C Input Connect the USB cable to the USB-C Input to charge your EcoEdge Pro. RECOMMENDATION: Use the USB cable included in the box. NOTE: Charge time from low to full charge is approximately 5-6 hours. While playing audio, EcoEdge Pro can be charged.
Settings section of most mobile phones and other Bluetooth enabled devices. When the ECOXGEAR selection is made and the Bluetooth connection is completed, your EcoEdge Pro will announce: “Your phone is connected.” The Bluetooth Status Indicator will shine SOLID BLUE. Once connected, select and play your desired audio. Pairing Mode: If the Bluetooth Status Indicator is not flashing or if you wish to place your EcoEdge Pro in pairing mode, press and release the Bluetooth Button on the Top Panel.
• While connecting the EcoEdge Pro speakers, make sure that the speakers are within a few feet of each other. NOTE: Your EcoEdge Pro shall sync & wirelessly pair with most Bluetooth enabled devices. The unit remembers the last device paired and will automatically search for previous connections when the speaker is turned on or when a device comes back into Bluetooth range. If a connection is lost due to range, the speaker will look to re-establish that connection.
instance) to your Smartphone using Bluetooth. Bluetooth Pairing & Connections: Once paired, should you have an issue switching between Bluetooth connections between devices, open the Bluetooth Section within the device currently connected to the EcoEdge Pro and delete the Bluetooth connection. The EcoEdge Pro will then be available to pair & connect to an alternate Bluetooth enabled Smartphone / Audio Device.
1 Power on the additional EcoEdge Pro speaker(s) (Speaker C and Speaker D). Press to cycle through to EcoCast Receiving Mode. The Mode Status Indicator will FLASH GREEN, and the speaker(s) will announce, “EcoCast receiving.” 2 On Speaker A (the speaker with the Mode Status Indicator shining SOLID RED), PRESS AND HOLD for 3 seconds. The Mode Status Indicator will FLASH RED.
1 Follow the Bluetooth Pairing & Your Audio instructions to connect one EcoEdge Pro (Speaker A) to your Bluetooth device. After your device is connected to Speaker A, you can select a song to play. 2 Press on Speaker A to initiate EcoCast Transmitting Mode. The Mode Status Indicator (the fourth LED Indicator from the left) will FLASH RED, and the speaker will announce, “EcoCast transmitting.” speaker will announce, “EcoCast receiving.
Specific Absorption Rate (SAR) information: This ECOEDGE PRO meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.
ISED Statement English:This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).
Informations sur le débit d'absorption spécifique (DAS): Cette ECOEDGE PRO répond aux exigences du gouvernement en matière d'exposition aux ondes radio. Les lignes directrices sont basées sur des normes élaborées par des organisations scientifiques indépendantes à travers une évaluation périodique et approfondie des études scientifiques. Les normes comprennent une marge de sécurité substantielle conçue pour assurer la sécurité de toutes les personnes, quel que soit leur ge ou leur état de santé.
