Use and Care Manual

Table Of Contents

Installation Guide for U-type Climbing Frame Trellis

Package Contents

• White U-shaped tube

• Green crossbars

• A pair of labor protection gloves

Preparation

• Choose a well-lit area where plants can receive ample sunlight.

• Prepare the soil by loosening it to a depth of 12-15 inches, removing

any debris or stones.

Assembly Instructions

1. Wearing Safety Gear:

– Put on the labor protection gloves to ensure safety during the

installation process.

2. Crossbar Attachment:

– Identify the pre-drilled holes on the U-shaped tube.

– Slide each green crossbar into the corresponding holes on the

tube, starting from the bottom and working up to the top,

ensuring they are secure and level.

Installation Steps

1. Trellis Positioning:

– Hold the U-shaped tube with crossbars attached and position it

in the desired location in your garden.

PAGE 1
Installation Guide for U-type Climbing Frame Trellis Package Contents • White U-shaped tube • Green crossbars • A pair of labor protection gloves Preparation • Choose a well-lit area where plants can receive ample sunlight. • Prepare the soil by loosening it to a depth of 12-15 inches, removing any debris or stones. Assembly Instructions 1. Wearing Safety Gear: – Put on the labor protection gloves to ensure safety during the installation process. 2.
PAGE 2
– Press down on the U-shaped tube to insert it into the soil. Depending on the soil hardness, you might need to gently hammer the tube into the ground for stability. 2. Training Plants on the Trellis: – Once the U-shaped tube is in place, you can start training your climbing plants on the trellis. Guide the vines through the crossbars to encourage vertical growth and help the plants establish themselves on the structure. This approach provides the necessary support for the plants as they grow.