® kickstand micro
6 7 8 10 14 18 21 24 27 28 29 30 32 Product Overview Features Interface Entry Level Operation Video/Photo Source Connection Customized Settings Wireless connection operation for iPhones Wireless connection operation for Androids Specifications FAQ FCC Statement Safety Instructions Warranty 3
Thank you for purchasing the Bem Wireless Kickstand Micro Projector! We hope that you find our products easy and fun to use, as well as innovative. In order for you to better interact with the product, please read the User Guide carefully and save it for future reference. 1. Read the instructions Before using the device, please read all safety and operating instructions. 2.
6. Ventilation This projector is equipped with intake and exhaust vents. WARNING: Do not block these openings, otherwise the heat may accumulate inside and effect picture quality or cause damage to the projector. 7. Power Please use the supplied power cord for the product. 8. Maintenance Do not attempt to service this projector. It is better to contact professional and technical personnel for any maintenance needed. 9.
Product Overview The bem wireless Kickstand MICRO Projector is a high performance, extra portable projector. It’s small enough to fit into your briefcase or purse for easy transport and setup is a breeze – kick out the leg, stand it up, and turn it on! The Kickstand Micro's ease of use is matched by it’s quality. This little technological wonder has a sleek finish with amazing performance specs to match.
Features of your Kickstand Micro Your Kickstand Micro has been awarded U.S. Patents and also includes advanced projector technology: 1. DLP® technology, up to 93-inch optimal screen size for your enjoyment. 2. Compact and portable with an integrated stand (utility patented) to simply carry and set up. 3. *Built-in 3000mAh rechargeable battery supports up to 2 hours 4. **Mirroring your screen can be seamlessly transferred from your mobile phone to your projector’s big screen. 5.
Interface Ports and Functions 1. Lens 2. Cooling air outlets 3. HDMI input connector 4. Earphone/ Speaker output 5. USB input 6.
7. Power switch 8. Support Kickstand 9. Speaker output 10. Focus Adjustment Wheel 11. Signal input key 12. Left selection key 13. Up key 14. Home key/OK 15. Right key 16. Return to prior screen key 17. Down selection key 18.
Entry Level Operation One minute installation guide Set up your Micro projector on a smooth, even horizontal surface. Kick out the leg. We recommend that you first fully charge the product before using. Charge for approximately 3 hours, if portable use is intended.(see 3. below) 1. Slide power button in the Power ON direction for 3 seconds. You will see the main Bem screen projected. Connect the power adapter to charge/use the Kickstand Micro projector. power focus Kick Out Leg Power Adapter 2.
Entry Level Operation (con’t) Starting up the Micro Projector Power On: Slide the power switch back for 3 seconds. The blue LED lights turn on, the system starts. Main Menu- Projected screen at start up. • You can use the focus adjustment wheel to make the picture sharp and clear.
Entry Level Operation (con’t) Adjust the projection size and resolution • • 12 Dimensions vary based on the distance between the Micro projector and the surface being projected onto.
Entry Level Operation (con’t) 1. 1’ meter 31 (3 ft) 93” 2. 3’ meters (9 feet) Automatic Adjustment: Keystoning With roughly 40 degrees of automatic image shape correction, the Micro projector will hold the picture in a rectangular format, regardless of your projector angle.
Video/Photo Source Connection Video source connection When connecting an external source to the projector, please be sure: 1. Turn off all equipment before making any connections. 2. Use the correct source to make the connection. (HDMI or USB) 3. Ensure the cables are firmly inserted.
Video/Photo Source Connection (con't) Input Source HDMI Connection Press the signal input key to transfer into HDMI input mode. USB HDMI Use the UP/DOWN keys to navigate NOTE: Many devices + laptop computers do not automatically turn on their external video port when connected to the projector. Please see the laptop’s user guide to find its source 11 key for connection, if needed.
Video/Photo Source Connection (con't) USB Connection: Input Source Press signal input key to transfer into USB mode.
11 12 Video/Photo Source Connection (con't) 14 11 15 A Media Selection The main startup screen will be projected, select either Movie or Photo. B A. Video file viewing: Select “Movie” mode and press key to enter the following figure B screen, use the navigation keys to select the video file from the USB device and press to playback. 12 16 13 B.
11 12 Customized Settings 13 1.) Picture Screen 14 Picture Mode Standard Color Temperature Aspect Ratio Noise Reduction PICTURE 15 The projector allows customized adjustments for the picture, sound, and options screens. Press the source input key for 3 seconds to get to customized settings. 16 To adjust, please use the Up, Down + Right arrows. Select the mode Sound Mode Standard preferred.
Aspect Ratio Noise Reduction Customized Settings 2.
SOUND Auto Volume Sorround Sound SPDIF Mode EQ Customized Settings 2.
Wireless connection operation for iPhones 1. Open your Wi-Fi setting of your smart device 2. Search connector “Microxxx” hot spots. The initial password is: 12345678. 3. Go to iphone screen and swipe up to get to Airplay. 100% 4. If you have issues please go to DLNA icon on the main screen of the Micro and it will walk you through the steps.
Mirroring On hone… Do Not Disturb: Off LTE Wireless connection operation for iPhones (cont) 0:42 -3:36 Track Name iPhone Artist Name — Album Name Carrier Settings Wi-Fi 9:41 AM 15 100% 15 9:41 AM Carrier 100% Wi-Fi AirDrop: Everyone Micro-xxx 3. If your smart device supports DLNA wireless transmission, PERSONAL HOTSPOTS then you can directly push Rusty Mitchell’s iPhone… image, music, videos to the projector.
Wireless connection operation for iPhones (cont) 9:41 AM Carrier 100% 9:41 AM Carrier 100% Wi-Fi 100% Carrier iPhone Rusty Mitchell’s iPhone… 100% Airplay Micro-xxx Do Not Disturb: Off LTE iPhone CHOOSE A NETWORK… Network Name 9:41 AM Mirroring On PERSONAL HOTSPOTS Network Name Carrier 192.168.49.1 iPhone Settings Micro-xxx 100% Airplay Settings 9:41 AM Carrier 9:41 AM Carrier Wi-Fi Settings 5. Select “Micro-xxx” as your device from smart phone.
Wireless connection for Android D. Miracast Android wireless transmission 1. Download “Miracast Widget and Shortcut” App or similar from Google Store. Android 2. Open Miracast App on Phone, 3. Select Miracast from Kickstand Micro projector main menu.
Wireless connection for Android (cont) Micro-xxx 4. Select Kickstand “Micro-xxx” as your device from smart phone.
Wireless connection for Android 5. Allow 5-10 seconds for the Kickstand Micro and app to communicate Micro-xxx Android Audio output: Plug 3.5mm port into the audio outputs on the back of the projector, enabling a connection to an audio speaker.
Specifications Power Input: AC 100-240V Power Output: DC 5V 3A Dimensions 144 x 93 x 20mm (5.6” x 3.6“ x .8”) Technology DLP 0.2EM DMD Resolution (854 x 480) Brightness 300 Lumens Contrast 800 : 1 Ratio 16 : 9 Native Light Source 3 x LED (RGB) Source Lifetime 20,000 Hours Projected Image Size 31” @ 1m (39”) | 93” @ 3m (118”) Focus Method Focus Adjustment Wheel Keystone Correction Automatic +/- 40 degrees Input HDMI & USB Audio Output 3.5mm audio output Built-in Speaker 0.
Frequently Asked Questions Video Output No image is displayed or no signal 1. Please check to see whether your projector normally started. 2. Please check whether the power is switched on & the battery is fully charged. 3. Please check whether to switch to HDMI or USB mode. 4. Please check the DC power cord connection. Projection screen flicker or color cast 1. Make sure Kickstand Micro battery is fully charged. (Full charge is approximately 3 hours) 2.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Safety Instructions This product is specially designed based on the full attention to safety; in order to make sure the accident-free operation, please abide the guidelines listed below: Correct Disposal of this • Always position the unit on a stable product. This marking and level surface.
Stay in Touch! For questions, comments or to purchase more bēm wireless products go to: bemwireless.com You can also follow us at: facebook.com/bemwireless youtube.
90 day LIMITED WARRANTY bēm wireless warranties this product against defects in materials and/ or workmanship under normal use for a period of ONE YEAR from the date of purchase by the original purchaser (“Warranty Period”).
LIMITED WARRANTY (con’t) Limits and Exclusions: Coverage under this Limited Warranty is limited to the United States of America, including the District of Columbia and the U.S. Territories of Guam, Puerto Rico and U.S. Virgin Islands. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
bēmwireless.com bēm wireless Algonquin, IL 60102 USA www.bemwireless.com ©2016 bēm wireless All Rights Reserved.
