User’s Manual
Product Overview Thank you for purchase of Roady 2-in-1 Bike Mount Bluetooth Speaker! To ensure a proper use of Roady please carefully read this manual before you start to use. Also, please safely keep this manual for future reference and trouble shooting. Package Contents 1. 2. 3. 4. 5. 6.
Carabiner and bicycle bar mounter with bracket are provided for two uses in carrying it over.
Getting Started Two easy steps get it up and running quickly. Step 1: Charging before use Connect your Roady Bluetooth Speaker to a USB power source using the enclosed USB charging cable. Step 2: Connecting to play There are two options to connect to your ROADY Bluetooth Speaker wirelessly by Bluetooth© or wired by the enclosed AUX cable.
2. Power off the unit:Hold the ON/OFF button to turn on the unit to turn off the unit, the Bluetooth indicator goes out at the same time. Play modes Bluetooth mode: play an audio signal from the connected Bluetooth© device. AUX mode: play an audio signal from the connected "wired" device. Please note, if an Aux cable is connected to the speaker it will not play music from Bluetooth© connected devices.
End call : Tap play/pause button during the call to end the call; Reject call : Hold play/pause button to reject the incoming call; Redial last number: Double tap play/pause button to redial last number when it is not in a call. Charge When the power is low, a beep will comes out from the speaker, please charge the speaker when you heard the beep. 1. Connect the standard USB end of the supplied USB cable to a USB power source (like PC, USB power adapter…etc.) 2.
Model Name:HL6621 Power Supply: USB 5V, 1A Built-in Lithium Ion batteries: 3.
interfere with searching and turn devices off. Power off and then power on the unit to restart the Bluetooth© function of the unit or your Bluetooth device Unplug any cables plugged into the AUX IN, restart all devices and then attempt pairing again. Issue: Interference or static during playback Solution: Avoid using the device between concrete or other building structures that may interfere with the signal.
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.