® eclipse
Contents English Page 3 Canadian Françis Page 18 Español Page 34.
Meet the Eclipse Speaker Thank you for choosing the Eclipse Speaker. Take a moment to familiarize yourself with its controls and its many functions, featuring a push down light that lets you snooze, play / pause music and answer the phone.
USB Port For charging your smartphone, tablet or MP3 player Aux Input Use the included Aux Cable to play audio from any device with a headphone output Bluetooth Indicator Clock Setting Choose between AM / PM, and set hours and minutes DC Input Connect the Power Adapter here Aux Cable x 1 Power Adapter x 1 If any of these were missing or damaged, please visit bemwireless.com to obtain a replacement.
Product Interface: LCD Screen AM/PM Buzzer Alarm 1/2 Audio Modes Sun Icon 5
Getting Started Step 1: Power Up Connect your Eclipse to an outlet using the included power adapter. The light will come on and the LCD screen will light up. (The light defaults to HIGH.) Press to change the light brightness and cycle between: HIGH – MEDIUM – LOW – OFF You can also change the brightness of the LCD display. (The LCD brightness defaults to HIGH.) Press and hold and cycle between: MEDIUM – LOW – OFF – HIGH Step 2: Audio Modes Press to select an audio mode, Bluetooth or Aux.
Getting Started (cont.) AUX Mode: The Eclipse can be connected to any device that has a standard 3.5mm headphone jack by using the included aux cable. Use the controls on the attached device to play / pause. Bluetooth Mode: Play audio wirelessly from a connected Bluetooth device. When the Bluetooth mode is selected, the word Bluetooth displays on the LCD screen. Go to the Bluetooth settings on your mobile phone, tablet or computer and select the device named “Eclipse”.
3. Press again and minutes will blink on the LCD screen, press + / - to adjust the minutes. 4. Press and hold setting. for 3 seconds to set and confirm the time Step 4: Set the Alarm The Eclipse Speaker features dual alarms that can be set for two different times. Once you decide which alarm you wish to activate (1 or 2), go to Step 2 to set the alarm time. Step 1: Choose 1 or 2 alarms 1. Press once to select and display the Alarm 1 icon on the LCD screen.
Getting Started (cont.) Step 2: Set alarm time and sound mode Set the alarm time and the sound mode of the activated alarm (1 or 2). (You cannot set the alarm if Alarm 1 and 2 are both activated or both off.) 1. Press to begin setting your alarm. The hours blink on the LCD screen, press + / - to adjust the hour. 2. Press a 2nd time, the minutes blink on the LCD screen, press + / - to adjust the minutes. 3.
Operation Details Push Down Multi-Function Light Pushing down on the multi-function light lets you snooze, play / pause music and answer the phone. Snooze When the alarm sounds, push down on the light to activate the snooze function. The alarm will start again in 9 minutes. Play / Pause Music After pairing your mobile phone to the Eclipse Speaker via Bluetooth, the speaker phone function is activated. •• Make a Call: Calls you make will automatically transfer to the speakerphone.
Troubleshooting Issue: Pairing is unsuccessful after multiple attempts Solution: •• Check if the Bluetooth indicator light is on. If the indicator light is off, press the power button to turn the unit on. If the Bluetooth indicator light still doesn’t come on after pressing the power button, please charge the unit. •• Check for other nearby Bluetooth devices that may interfere with pairing and turn devices off.
Maintenance Please follow the instructions below for cleaning your Eclipse Speaker: •• Power off the unit and unplug the power adapter from wall outlet •• Use a soft, dry, lint-free cloth and wipe gently •• Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored For questions, comments or to purchase more bem wireless products go to bemwireless.
Product Name : Eclipse Model Number : HL2512 Power Supply: 5V,2A Output power: 2.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. bēm wireless http://bemwireless.com/ bēm wireless LLC. 1725 Kilkenny Ct. Woodstock, IL.
Safety Instructions This product has been designed with safety in mind; to ensure accident free operation, please follow the guidelines listed below: •• Always position the unit on a stable and level surfaces.
IC ID Statement - English: “ This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.” This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.