Product Overview Product Interface In order to make sure you get the best possible results from your new Mini Mobile, please thoroughly read and carefully follow all instructions in this User’s Manual or on the product. Keep this User’s Manual in a convenient location for future reference. Package contents: Mini Mobile x 1 Micro USB charging cable x 1 Aux cable x 1 User’s Manual x 1 If any of these were missing or damaged, please visit bemwirelesss.com to obtain replacement.
Getting Started Operation Details We know you are excited to experience your new Mini Mobile. These two easy steps will get you up and running quickly. Power on / Power off Hold the power button for 3 seconds until the Bluetooth indicator will light up; the Mini Mobile is on and ready to be paired. Hold the power button for 3 seconds until the Bluetooth indicator go out, the unit is off. Step 1: Charge It Connect your Mini Mobile to an outlet using the USB charging cable.
Operation Details (cont.) Troubleshooting Charging the speaker When the Battery is less than 15%, a shot beep will comes out from the Mini Mobile to signify the power is low. Using supplied USB cable connect the Mini Mobile to a USB power source, like USB ports on PC, USB charging port to charge, the power indicator will lights up when it starts charging, and it will goes off when it is fully charged.
Maintenance More Info (cont.) Please follow the instructions below for cleaning your Mini Mobile • Power off the unit and unplug the power adapter from wall outlet • Use a soft, dry, lint-free cloth and wipe gently • Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored For questions, comments or to purchase more bēm wireless products go to bemwireless.com For information on your product’s warranty go to: bemwireless.
FCC Statement (cont.) • • Safety Instructions (cont.) • Do not place any ware with full water on the top of the unit, Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
IC ID STATEMENT - English: " This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device." - French:" Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.