EXO-200_UserGuide_3T.
Contents EXO-200_UserGuide_3T.
Product Overview Thanks for purchasing the bēm wireless EXO-200! This speaker is Bluetooth enabled, easy to use, and able to hit the trail, making it ideal for listening to music on a hike, at home, or anywhere in-between. But to make sure you get the best possible results from your new EXO-200 Bluetooth speaker, please thoroughly read and carefully follow all instructions in this User Guide. This short guide explains everything you need to know to start using your speaker.
Product Overview (cont) The bēm wireless EXO-200 combines great sound with Bluetooth connectivity. With a rugged design and a built-in climbing hook, hands-free use on the go is easy! Simply pair your EXO-200 with your Bluetooth enabled device and enjoy wireless performance wherever you are.
Durability V1 Trail-ready, life-ready, you ready. The EXO-200 is the perfect combination of good looks and durability. It’s water and dust resistant and can handle almost anything you throw at. Just clip it to your pack with the built in climbing clip and live life without worrying about your music. V2 Trail-ready, life-ready, you ready. The EXO-200 is the perfect combination of good looks and durability. Just clip it to your pack and live life without worrying about your music.
Meet Your New EXO-200 BOTTOM VIEW 1 2 3 BACK VIEW 4 5 1. Power 2. Volume Decrease 3. Play/Pause 4. Volume Increase 6 7 8 5. Bluetooth Indicator LED 6. Charging Indicator LED 7. Micro USB Port 8. AUX IN Port 6 EXO-200_UserGuide_3T.
Getting Started We know you’re excited to start using with your new EXO-200. And you should be. Luckily, these three easy steps will get you up and running quickly. Step 1: Charge It Connect your EXO-200 to a wall outlet using the USB AC adaptor or to a PC/laptop using the micro USB charging cable. The red charging indicator LED will turn on during charging and will turn off when fully charged. Please allow approximately 2 hours to fully charge. You can use your EXO-200 while it’s charging.
2. Activate Bluetooth on your smartphone or other Bluetooth enabled device (refer to your device user guide for details). Your smartphone/ device will now begin searching for Bluetooth devices. 00” from the device list. When connected, another multi-tone chime will After initial pairing, “EXO-200” will appear in your device list and a connection will automatically be established when the speaker is turned on and Bluetooth is activated on your device.
Operation Details The below instructions will help you get the most use out of your EXO-200. Power On/Off Press and hold the POWER button to turn on your EXO-200. A multitone chime will sound to indicate that the speaker has powered on and Press and hold the POWER button to turn off your EXO-200. No chime will sound when the unit is turned off, but the Bluetooth LED will stop NOTE: To preserve battery life, the speaker will automatically power off if not connected to Bluetooth for approximately 3 minutes.
Volume Control 1. On your EXO-200: Repeatedly press the VOLUME UP (+) button to increase the volume incrementally or hold the VOLUME UP (+) button to steadily increase the volume. Repeatedly press the VOLUME DOWN (-) button to decrease the volume incrementally or hold the VOLUME DOWN (-) button to steadily decrease the volume. 2. On your device: Adjust the volume of your music as you normally would. NOTE: When maximum volume is reached, the VOLUME UP (+) button will no longer increase the volume.
Maintenance To keep your EXO-200 working well and looking sharp, simply wipe with a dry cloth as needed. Do not use cleaning agents as they may Product Name EXO-200 Model Number EXO200 Music Time 8 Hours Bluetooth V2.1 with auto pairing Power Supply DC IN and MICRO USB Dimensions 2.5” x 2.5” x 2.5” (approximate) Battery Rechargeable 3.7V, 800mAH Bluetooth Range 40 Feet EXO-200_UserGuide_3T.
Troubleshooting Your EXO-200 is designed to operate easily and reliably. However, problems can arise from time to time. If you need a little help, check out these common issues and solutions. Will Not Turn On • Your EXO-200 may not be charged. Please charge for 2 hours. Bluetooth Won’t Connect • Make sure your EXO-200 speaker is attempting to pair with your . • Make sure the Bluetooth function on your smartphone or other Bluetooth enabled device is activated.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2200 responsible for compliance could void the user’s authority to operate the equipment.
FCC Statement (cont) However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
IC Caution. - English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. - French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Safety Instructions This product is specially designed based on full attention to safety; in order to encourage accident-free operation, please follow the guidelines listed below: • Do not drop, unpack, open, hit, bend, puncture, burn or otherwise attempt to damage/modify the set • Avoid using the set in the rain or near basins or sinks where parts may come in contact with water • Protect the set from all heat-producing devices, including radiators, forced air vents, cooking surfaces, and other heat-produci
Safety Instructions (cont) Warning • The battery (battery or batteries or battery pack) shall not be • CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 90-Day Limited Warranty bēm wireless warranties this product against defects in materials and/ or workmanship under normal use for a period of NINETY (90) DAYS from the date of purchase by the original purchaser (“Warranty Period”).
Obtaining Service: To obtain warranty service, call bēm wireless at 1-815-337-0541 or e-mail customerservice@bemwireless.com. Please be prepared to describe the product that needs service and the nature of the problem. A purchase receipt will be required. All repairs and replacements must be authorized in advance. Service options, parts availability and response times will vary.
Stay in Touch! For questions, comments, or to purchase additional bēm wireless products, go to: bemwireless.com. You can also follow us at: facebook.com/bemwireless twitter.com/bemwirelessco youtube.com/bemwireless EXO-200_UserGuide_3T.
bēm wireless | 1725 Kilkenny Court | Woodstock IL 60098 EXO-200_UserGuide_3T.