Setup Guide

ClearSky CHIME + SIREN
Setup Guide
Model: CS-902
1.
Thanks for choosing
Ecolink’s ClearSky
Chime + Siren. You’ve made
a sound investment!
LED Indicator
Pair Button
Volume Down
Volume Up
microSD slot
2.
Pair your ClearSky
CHIME+SIREN with your
ClearSky Bridge
1. Press the learn
button on the back of
the ClearSky Bridge.
2. Plug the
Chime+Siren into the
AC outlet.
3. Once your ClearSky Chime+Siren is
successfully paired, it will blink a green
LED and play a chime sound.
3.
Conguring Sound Effects
The ClearSky Bridge features different
sounds you can use for the following events:
Chime Notications
Alarms
Entry Delay
Exit Delay
Security Modes
To congure your Chime+Siren to
use different sound effects for
chimes or alarms, please scan the
QR code below for additional
instructions.
4.
Custom sound effects
The ClearSky Chime+Siren features a
microSD input to allow you to play your own
custom sounds.
Custom sounds
To congure your Chime+Siren to
use custom sound effects, please
scan the QR code below for
additional instructions.
Default Sound Effects
These are the default sound effects
included with your Chime + Siren
1. Chime 1
2. Chime 2
3. Chime 3
4. Chime 4
5. Chime 5
6. Chime 6
7. Chime 7
8. Chime 8
9. Chime 9
10. Chime 10
11. Chime 11
12. Chime 12
13. Alarm Siren 1
14. Exit Delay
15. Entry Delay
16. Smoke Alarm
17. CO Alarm
18. Armed Away
19. Armed Home
20. Disarmed
21. Front Door
22. Side Door
23. Back Door
24. Garage Door
25. Alarm Siren 2
26. Alarm Siren 3
27. Doorbell 1
28. Doorbell 2
29. Doorbell 3
30. Doorbell 4
For more support, please go to
www.EcolinkClearSky.com