Certification Exhibit FCC ID: Z9O-FAS1533 IC: 10060A-FAS1533 FCC Rule Part: 15.209, 15.231, 15.249 IC Radio Standards Specification: RSS-210 ACS Project: 13-2145 Manufacturer: UltraClenz, LLC Models: FAS1533-00, FAS1533-01, FAS1533-02, FAS1533-03 User Manual 3998 FAU Blvd.
FAS1533 Smart Link Dispenser Beacon Module User's Guide Revision 2 04/08/14 UltraClenz, LLC
FAS1533 User's Guide UltraClenz, LLC Table of Contents Revision History .......................................................................................................................................................2 1.0 Purpose ...............................................................................................................................................................3 2.0 Applying Power..............................................................................................
FAS1533 User's Guide UltraClenz, LLC Revision History Revision Date By Description 0 11/22/13 JH Initial Release 1 01/16/14 JH Changed title and changed the purpose 2 04/08/14 AP Add Appendix A Page 2
FAS1533 User's Guide UltraClenz, LLC 1.0 Purpose To explain how the FAS1533 functions. The detailed procedures demonstrate how the led's, service flag, range switches and dispense activation work. Service Flag Blue Indicator Led's Fig.1 - FAS1533 Compact Dispenser Beacon 2.0 Applying Power 2.1 Procedure 1. The dispenser power is disabled to prevent the phono jack contacts from the shorting out the gearbox. 2. Insert the phono jack and verify the connection is fully engaged. 3.
FAS1533 User's Guide UltraClenz, LLC 3.0 Service Flag 3.1 Purpose The service flag is used to indicate the dispenser needs a replacement cartridge. When the service flag is moved from the down (resting)position to the up (latched) position (seeFig.2),the replace cartridge bit will be set and transmitted on the next heartbeat message.
FAS1533 User's Guide UltraClenz, LLC 4.2 Procedure 1. 2. 3. 4. 5. 6. 7. 8. 9. Apply power to the dispenser beacon Push and release the + range switch four times The blue led will flash once with each activation Push and release the + range switch once (fifth position) The led will flash twice indicating the range is set to maximum. If this does not occur depress both the + and - simultaneously to set to factory default . The blue led will flash 4 times to indicate factory default range. Test again.
FAS1533 User's Guide UltraClenz, LLC Appendix A – FCC and Industry Canada Statements Warning: Changes or modifications to this device not expressly approved by UltraClenz, LLC could void the user’s authority to operate the equipment. Class B Devices: “NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
FAS1533 User's Guide UltraClenz, LLC device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.