Bentley WiNET Hub User Guide FAS1505 DOC1037 Revision 0
Document Title UltraClenz, LLC Table of Contents Revision History ......................................................................................................................................................... 3 Box Contents ............................................................................................................................................................. 4 Overview ..........................................................................................................
Document Title UltraClenz, LLC Revision History Revision Date By 0 01/25/11 MJB Description Initial Release Page 3
UltraC Clenz, LLC D Document Title B Contents Box 1 WiNET Hu ub (with Anten nna) 1 Power Sup pply 2 Screws an nd Anchors 1 User’s Guiide O Overview The FASxxxxx WiNet Hub, when used as a compon T nent of the WiNET W wirelesss monitoring g solution, relays radio transmissionss from the WiN Net Tag to the e WiNET Gateway (FASxxxxx) (see Figu ure 1). Figure 1.
Document Title UltraClenz, LLC Installing the Hub This procedure will require a small hammer, drill, drill bits, level and a screw driver. Step 1 – Positioning the Chassis Place the leveled WiNet Hub on the mounting location to transfer the drill centers. Step 2 – Drilling the Holes Drill 2 holes with the proper bit. Use standard bits for dry wall and masonry bits for tile applications. Step 3 – Placing the Anchors Gently tap the anchors in place using a hammer.
Document Title UltraClenz, LLC Step 2 – Inserting the Power Supply Wires With the small flat-tip screwdriver in place, insert the wire with the white stripe on it from the power supply (positive wire) (see Figure 3) into the circular opening directly beneath the rectangular slot until it stops and pull out the small flat-tip screwdriver to lock the wire in place. Give the positive wire a slight tug to insure that it is locked into place.
Document Title UltraClenz, LLC Certification and Safety Approvals FCC This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Document Title UltraClenz, LLC Warranty This device is warranted against defective materials and workmanship for one year from the date of delivery. Equipment covered by this warranty will be repaired or replaced in the United States and Canada, WITHOUT CHARGE, except for shipping and handling, by our Factory Service Center.