Certification Exhibit FCC ID: Z9O-92053000 IC: 10060A-92053000 FCC Rule Part: 15.209, 15.249, 15.231 ISED Canada’s Radio Standards Specification: RSS-210 TÜV SÜD Project Number: 72126038 Manufacturer: Ecolab, Inc. Model: 92053000 Manual 3998 FAU Blvd.
9205-3000 (FAS1548) Nexa™ Touch Free Dispenser Beacon User’s Guide ???Revision A
9205-3000 (FAS1548) Nexa™ Touch Free Dispenser Beacon User’s Guide Ecolab, Inc. Table of Contents Abstract........................................................................................................................................................................................ 3 Revision History ........................................................................................................................................................................... 3 REVISION LEVEL ...........
9205-3000 (FAS1548) Nexa™ Touch Free Dispenser Beacon User’s Guide Ecolab, Inc. Abstract This document describes basic setup, function, use and maintenance of the 92053000 (FAS1548) NEXA™ Touch Free Beacon Module. Revision History TITLE: NEXA TOUCHFREE DISPENSER PRODUCTION ASSEMBLY AND TESTING REQUIREMENTS Ecolab Research Center Eagan, MN 55121 REVISION LEVEL REV A DESCRIPTION Initial Release EC NO.
9205-3000 (FAS1548) Nexa™ Touch Free Dispenser Beacon User’s Guide Ecolab, Inc. The ENCOMPASS HAND HYGIENE COMPLIANCE MONITORING SYSTEM (Encompass HH CMS) is a state of the art wireless hand hygiene reminder system, designed to enable best practices for proper hand hygiene in a healthcare facility.
9205-3000 (FAS1548) Nexa™ Touch Free Dispenser Beacon User’s Guide 1.3 Ecolab, Inc. Dashboard and Offsite Server The Dashboard is a web-based application running on a designated offsite server. It is responsible for collecting, processing and archiving onsite Dispenser Beacon and Bed Beacon event data sent by the onsite Gateway. The Dashboard provides a user interface which allows access to hand hygiene data, statistics and reports compiled from event data originating at the healthcare facility.
9205-3000 (FAS1548) Nexa™ Touch Free Dispenser Beacon User’s Guide Ecolab, Inc. 1. Nexa Touch Free Dispenser Beacon Overview The Nexa Touch Free Dispenser Beacon (part number 9205-3000) is an integral component of the Encompass HH CMS. When the Encompass HH CMS is installed, Healthcare facilities determine which dispensers they wish to have monitored, and a beacon is installed in those dispensers.
9205-3000 (FAS1548) Nexa™ Touch Free Dispenser Beacon User’s Guide 2.2 Ecolab, Inc. Adjusting Communication Range The range buttons (see Figure 3) are used to increase or decrease the communication distance (range) between the TDB and HCW Badge. The range buttons are accessed via ports near the battery door of the TDB. Use a non-electrically conductive (not metal) instrument, such as a tooth pick, to gently press the buttons. When a button has been pressed, the LED will flash.
205-3000 (FAS1548) Nexa™ Touch Free Dispenser Beacon User’s Guide 2.3 Ecolab, Inc. Installing the Touch Free Dispenser Beacon in a Nexa™ Touch Free Dispenser The Nexa TDB can only be used in the large (“Classic”) version of the Nexa Touch Free Dispenser. In order to install the beacon follow these steps: (1) Open the dispenser by depressing the top latch button. (2) Remove product bottle (if any) from the dispenser and set aside.
9205-3000 (FAS1548) Nexa™ Touch Free Dispenser Beacon User’s Guide 2.4 Ecolab, Inc. Confirming FCC / ISED Compliance Verify that the FCC / ISED compliance label is present and that its meaning is understood. FCC / ISED Label Figure 5.
9205-3000 (FAS1548) Nexa™ Touch Free Dispenser Beacon User’s Guide 2.5 Ecolab, Inc. Removal of the Touch Free Dispenser Beacon from a Nexa™ Touch Free Dispenser. To remove the beacon, follow these steps: (1) Open the dispenser by depressing the top latch button. (2) Remove product bottle (if any) from the dispenser and set aside (3) Unscrew the captive screw from the boss, to release the beacon and allow it to be removed.
9205-3000 (FAS1548) Nexa™ Touch Free Dispenser Beacon User’s Guide Ecolab, Inc. transmit the Badge’s HH status (both just prior to and immediately after the dispense) to the Hub. The TDB will also transmit the time, date and location of the event, along with the battery status of the HCW badge and the TDB. If the user is not wearing a badge, or is not within the proximity bubble, the time, date and dispenser ID for the product dispense event will be relayed to the hub as a “non-badged dispense”.
9205-3000 (FAS1548) Nexa™ Touch Free Dispenser Beacon User’s Guide 1. Ecolab, Inc. Two (2) alkaline AAA Duracell® Coppertop Batteries 5.3.2 Battery Replacement Steps The following steps describe how to remove the TDB from the Nexa Touch Free Dispenser, and replace the batteries: 1. Open the dispenser by depressing the top latch button. 2. Remove product bottle (if any) from the dispenser and set aside. 3. Unscrew the retained screw from the boss, to release the beacon and allow it to be removed. 4.
9205-3000 (FAS1548) Nexa™ Touch Free Dispenser Beacon User’s Guide Ecolab, Inc. Appendix A - Certification and Safety Approvals FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
9205-3000 (FAS1548) Nexa™ Touch Free Dispenser Beacon User’s Guide Ecolab, Inc. Appendix B - Warranty This device is warranted against defective materials and workmanship for two years from the date of purchase. Equipment covered by this warranty will be repaired or replaced in the United States and Canada, WITHOUT CHARGE, except for shipping and handling, by our Factory Service Center.