SDS

ManualsBrandsEco Clean ManualsEpoxy & Accessories25 lbs. Super Patch Epoxy Patching System Pail

Safety Data Sheet

10-22 Mix B - Epoxy 3 Component Patch, High Build Epoxy Floor Coating Date of Issue: 4/19/16 Page 1 of 7

SECTION 1: IDENTIFICATION

SECTION 2: HAZARDS IDENTIFICATION

Product Name: Epoxy 3 Component Patch, High Build Epoxy Floor Coating

Product Number: 10-22 Mix B

Recommended Use: Floor Topping, Patching

CAS Numbers: 100-51-6, 2855-13-2, 84852-13-3

Manufacturer: Topaz Industries

130 Corporate Drive, Holtsville, NY 11742

Phone: 631-207-0700

Emergency number: Chemtrec

800.424.9300

Classiﬁcation: Flammable Liquids, DOT Class 3 Flammable Lliquids

OSHA Regulatory Status: This chemical is considered hazardous by the 2012 OSHA Hazard Communication

Standard (29 CFR 1910.1200)

Acute Toxicity - Oral .............................................................. Category 4

Skin corrosion/irritation .........................................................Category 1B

Serious Eye Damage/Eye Irritation ....................................... Category 1

Skin Sensitization .................................................................. Category 1

Reproductive Toxicity ............................................................Category 2

Flammable Liquids ................................................................ Category 4

Label Elements: Danger

Pictograms:

Signal Word: Warning

Hazard Statements: Harmful if swallowed. Causes severe skin burns and eye damage. May cause an allergic skin

reaction. Suspected of damaging fertility or the unborn child. Combustible liquid.

Appearance: Liquid

Precautionary Statements: Prevention. Obtain special instructions before use. Do not handle until all safety precautions

have been read and understood. Use personal protective equipment as required. Wash face,

hands and any exposed skin thoroughly after handling. Do not eat, drink or smoke when

using this product. Do not breathe dust/fume/mist/vapors/spray. Contaminated work

clothing should not be allowed out of the workplace. Wear protective gloves. Keep away

from heat/sparks/open ﬂames/hot surfaces, no smoking.

Response. Immediately call a poison center or physician. Eyes: If in eyes, rinse cautiously

with water for several minutes. Remove contact lenses, if present and easy to do. Continue

rinsing. Immediately call a poison center or physician. Skin: If on skin, or hair, immediately

take off all contaminated clothing. Rinse skin with water. Wash contaminated clothing before

re-use. If skin irritation or rash occurs, get medical attention. Inhalation: If inhaled, remove

victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a

poison center or physician. Ingestion: If swallowed, call a poison center or physician if you

feel unwell. Rinse mouth. DO NOT induce vomiting. Fire: In case of ﬁre, use CO

, dry

chemical, or foam for extinction.

Summary of content (7 pages)

PAGE 1
Safety Data Sheet SECTION 1: IDENTIFICATION Product Name: Epoxy 3 Component Patch, High Build Epoxy Floor Coating Product Number: 10-22 Mix B Recommended Use: Floor Topping, Patching CAS Numbers: 100-51-6, 2855-13-2, 84852-13-3 Manufacturer: Topaz Industries 130 Corporate Drive, Holtsville, NY 11742 Phone: 631-207-0700 Emergency number: Chemtrec 800.424.
PAGE 2
Safety Data Sheet Precautionary Statements: Storage. Store locked up. Store in a well-ventilated place. Keep cool. Disposal. Dispose of contents/container to an approved waste disposal plant. Other Hazards: Designed to be mixed with other components. Mixture will have hazards of all components. Caution: all floor coatings may become slippery when wet. Where non-skid characeristics are desired, a small amount of clean sand may be added.
PAGE 3
Safety Data Sheet Specific Hazards Arising From the Chemical: Combustible material. Closed containers may rupture if exposed to fire or extreme heat. Keep product and empty container away from heat and sources of ignition. Thermal decomposition can lead to release of irritating gases and vapors. Sensitivity of Mechanical Impact: No. Sensitivity to Static Discharge: Yes.
PAGE 4
Safety Data Sheet SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION CONTROL PARAMETERS - Exposure Guidelines Chemical Name Benzyl alcohol Isophoronediamine Nonylphenol ACGIH TLVs OSHA PELs N/E N/E N/E N/E N/E N/E ACGIH - American Conference of Governmental Industrial Hygienists Exposure Limits OSHA - Occupational Safety & Health Administration Exposure Limits N/E - Not Established EXPOSURE CONTROLS Engineering Measures: Ensure adequate ventilation, especially in confined areas.
PAGE 5
Safety Data Sheet Vol. % Solids Wt. % Volatiles Vol.
PAGE 6
Safety Data Sheet NUMERICAL MEASURES OF TOXICITY (BASED ON CHAPTER 3.1 OF GHS DOCUMENT) ATEmix (oral): 1140 mg/kg ATEmix (dermal): 4031 mg/kg ATEmix (inhalation-dust/mist): 35.2 mg/L ACUTE TOXICITY - COMPONENT Benzyl Alcohol LD50 Oral LD50 Dermal LC50 Inhalation (Vapor) 1230-1660 mg/kg (Rat) 2000 mg/kg (Rabbit) >5000 mg/m3 (Rat) Nonylphenol LD50 Oral 1300 mg/kg (Rat) CARCINOGENICITY There are no known carcinogenic chemicals in this product above reportable levels.
PAGE 7
Safety Data Sheet SECTION 15: REGULATORY INFORMATION INTERNATIONAL INVENTORIES TSCA Yes - All components are listed or exempted DSL/NDSL Yes - All components are listed or exempted U.S. FEDERAL REGULATIONS SARA 311/312 HAZARDOUS CATEGORIZATION Acute Health Hazard Yes Chronic Health Hazard Yes Fire Hazard Yes Sudden Release of Pressure Hazard No Reactive Hazard No SARA 313 Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA).