User's Guide

ManualsBrandsEchostar Technologies ManualsElectronicsWLAN DTS/UNII a/b/g/n SISO/MIMO OTA Streaming Device

9:45 AM

100%

iPad

ANTENNA IN

Need more help?

Connect AirTV™ to your antenna

Connect an Ethernet cable (optional)

Connect the power cable

Set up your AirTV

Quick Start Guide

Stay connected with AirTVWe’re here for you.

For more information and a step-by-step setup video,

visit airtv.net/setupvideo.

Find a treasure trove of helpful articles at support.airtv.net

Twitter

@AirTVUs

Facebook

facebook.com/

USAirTV

Before you start

Place your HDTV Over-The-Air antenna in a location that can best

receive signals such as a window. You may need to adjust the antenna

for optimal performance later, so it’s best not to permanently mount

it just yet. For more information on ideal antenna placement in your

home, visit airtv.net/antennaplacement.

Connect your AirTV

to your antenna via

coaxial cable.

This step is only needed

if you wish to provide

your own Ethernet cable

for a wired network setup.

If you plan to connect to

your AirTV using WiFi,

you can skip this step.

One or more lights

should start blinking on

the front of the AirTV,

once the power cable

is properly connected.

airtv.net/setup

To complete setup, visit the above link on your computer

or mobile device and follow the instructions.

What’s in the box

Watch all your local Over-The-Air

television. Anywhere.

AirTV

™

Power Cable

HDTV Over-The-Air

antenna with included

coaxial cable*

Sling Televison

™

app–

free to download

What’s needed

*Visit airtv.net/antennas for more information

Ethernet Cable

Power Cable

Coaxial Cable

Antenna

Modem/Router

airtv.net

Federal Communications Commission Notices

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ

and on, the user is encouraged to try to correct the interference by following one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations to this device may void your authority to operate this equipment.

Device must be installed at least 20cm (~8 inches) from typical person locations per FCC RF Exposure guidelines.

Operation in the band 5150-5250 MHz is only for indoor use.

L.L.C. Other products and companies mentioned are the trademarks of their respective owners and not of EchoStar, Inc.

Warranty, safety, regulatory, and legal information can be found at airtv.net/warranty

Part Number: 208323

320mm

110mm 110mm 100mm

180mm

320mm

110mm 110mm 100mm

180mm

™