User's Manual

MySlingStudio.com
Quick Start Guide
CAMERALINK
Important Safety Instructions
CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 60°C or Incinerate.
Follow All Instructions.
Read and understand all operating instructions prior to use. Keep this document for future
reference.
Do not immerse the product in water or expose it to rain, moisture, dripping or splashing.
Do not leave the product where it could reach very high temperatures, for example inside a
vehicle in direct sunlight.
Avoid dropping the product or subjecting it to excessive force, pressure or impacts.
Package and secure the product well during transport to avoid excessive shock, vibration and
damage.
Do not use or charge the product if it appears damaged or abnormal.
Keep the product, plastic packaging and small parts away from babies and children.
Dispose of or recycle the product properly according to local codes. Do not shred.
Do not charge the product at high ambient temperatures.
Handle the product carefully to avoid static electricity discharge into the product. Static may
damage sensitive protection components and cause failures.
Do not charge the product when ambient temperatures are below 0°C or above 35°C (32°F or
above 95°F).
If the product emits odor, generates heat, becomes discolored or deformed, or in any way
appears abnormal during use, recharging or storage, immediately remove it from the charger
and stop using it.
The product should be stored at room temperature. Product should be charged once every 3
months while storing.
© 2017 SlingStudio™ is a trademark of Sling Media, Inc. Other products and companies mentioned are
the trademarks of their respective owners and not of Sling Media, Inc.
Warranty, safety, regulatory and legal information can be found at MySlingStudio.com/legal
213753
QSG_SlingStudio CameraLink 213753_01
Front/Back Cover
8.75” x 6.75”