EGSF1 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, contact us at www.echogear.com.
CAUTION: IMPORTANT SAFETY INSTRUCTIONS — PLEASE READ ENTIRE MANUAL PRIOR TO USE — SAVE THESE INSTRUCTIONS Before getting started, let’s make sure this mount is perfect for you! weigh MORE than 25 lbs. (11.3 kg)? Yes? This mount is NOT compatible. 25 lbs. (11.3 kg) is your 2 What wall made of? Visit echogear.com to find a compatible mount.
Dimensions 3-D TV INTERFACE 7.87in 200mm .35in 8.8mm 3.94in 100mm 7.87in 200mm WALL PLATE TOP VIEW - EXTENDED SIDE VIEW - EXTENDED 2.80in 71mm 6.40in 162.6mm 16deg DOWN TILT 10.47in 265.9mm 8.15in 207.1mm 30deg 30deg 30° SWIVEL LEFT AND RIGHT WITH AN APPROXIMATE 32" TV FULLY ASSEMBLED MOUNT 4deg UP TILT SIDE VIEW - RETRACTED TOP VIEW - RETRACTED 8.80in 223.6mm 3.20in 81.4mm 8.80in 223.6mm 10.26in 260.5mm .86in 21.
STEP 1 Attach TV Bracket to TV STEP 1 Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
1.1 Measure TV hole pattern 100 mm 130 mm 200 mm 300 mm 340 mm 400 mm = 10 cm = 13 cm = 20 cm = 30 cm = 34 cm = 40 cm ≈ ≈ ≈ ≈ ≈ ≈ 1.2 Assemble Your TV Bracket 4 in. 5 1/8 in. 7 7/8 in. 11 3/4 in. 13 3/4 in. 15 3/4 in. A 7.5 x 7.5 10.0 x 10.0 10.0 cm 7.5 cm 7.5 cm 01 10.
B 02 20.0 x 20.0 C 20.0 x 10.0 20.0 cm 02 20.0 cm 02 02 01 01 20.0 cm 02 02 02 03 6 10.
1.4 Spacers? 1.
1.5 Attach TV Bracket CAUTION: Ensure TV bracket is securely fastened before moving on to the next step. TV Bracket Configurations B and C Flat Back 01 02 04 05 06 07 NOTE: For 20.0 x 20.0 cm or 20.0 x 10.0 cm hole patterns, you may need to loosen the screws 03 to align the bracket extenders 02 . After bracket extenders 02 are secured to the back of your TV, retighten screws 03 .
STEP 2 Attach Wall Plate to Wall For wood stud installations, follow STEP 2A on PAGE 10 For concrete installations, follow STEP 2B on PAGE 13 STEP 2 Parts and Hardware Lag Screw Washers Wall Plate Assembly 5/16 in. 15 x2 Lag Screws 14 x1 16 x2 5/16 x 2¾ in. Concrete Installation Kit CMK1 (NOT INCLUDED) Contact Customer Service at www.echogear.com to have these additional pieces shipped directly to you. x4 5/16 x 2¾ in. 5/16 x 2¾ in. x4 .695 x .350 x .075 in. .695 x .350 x.075 in.
STEP 2A Wood Stud Option Min. Wood Stud Size: nominal 2 in. (51 mm) actual 1 ½ in. (38 mm) Min. Wood Stud Size: Max. 5/8 in. (16 mm) 1 10 2 nominal 4 in. (102 mm) actual 3 ½ in.
5 4 14 2¾ in. (70 mm) 7/32 in. (5.
CAUTION: Avoid potential personal injury or property damage! All lag screws 16 MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step. 6 14 14 16 16 12 15 NOTE: If needed, you can make small level adjustments to the wall plate assembly 14 by loosening the bottom lag screw 16 and shifting the wall plate assembly 14 until level.
STEP 2B Solid Concrete or Concrete Block Option CAUTION: Avoid potential personal injuries and property damage! Mount the wall plate directly onto the concrete surface. CAUTION: Never drill into the mortar between blocks. Concrete Installation Kit CMK1 is not included (see page 9) Contact Customer Service at www.echogear.com to have the additional hardware shipped directly to you. 2 Min. Min. 8 in. (203 mm) 8 in. (203 mm) Min. 16 in. (406 mm) 1 Min. 8 in. (203 mm) 14 3 in. (76 mm) 3/8 in.
CAUTION: Avoid potential personal injury or property damage! All lag screws 16 MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step. *Contact Customer Service at www.echogear.com to have the Concrete Installation Kit shipped directly to you.
STEP 3 Hang TV onto Wall Plate STEP 3 Parts and Hardware Additional Parts and Hardware Securement Screw Cable Ties 19 x3 17 x1 Securement Washer Tilt Tension Adjustment Wrench 7/32 in.
HEAVY! You may need assistance with this step. CAUTION: Avoid potential personal injuries and property damage! This securement screw 17 must be installed to secure the TV onto the wall plate assembly 14 .
Manage Cables IMPORTANT: Fully extend the arm of wall plate assembly 14 to ensure you have enough slack in the cables for full TV movement.
TV Adjustments TILT ADJUSTMENT REMOVING THE TV LEVEL ADJUSTMENT Your TV should adjust easily when moved, then stay in place. If your TV is too loose or too tight, adjust the tilt tension knob by hand. NOTE: Once your TV is in place, tighten the tilt tension knob to prevent unwanted movement. To adjust the leveling of your TV, loosen the securement screw 17 , level your TV, then tighten securement screw 17 .
Features Fully articulating arm with 3 pivot points creates optimal viewing positions TV bracket expands to fit TV hole patterns from 75 x 75 mm up to 200 x 200 mm TV tilts up or down for the perfect viewing angle Adjustments allow fingertip control of TV or restriction of TV movement Level adjustments create a worry-free installation Cable tie hook holds cables along mount arm for a clean look 19
Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.