#YourGearUpgraded Extendable Tilt TV Wall Mount Model EGLT2 INSTRUCTION MANUAL
IMPORTANT SAFETY INSTRUCTIONS. READ ENTIRE MANUAL PRIOR TO USE. SAVE These INSTRUCTIONS Yea, the boring stuff ... but read it, so you don’t jack things up! Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
Verify Your Wall Construction wood studs? CAUTION: DO NOT install into drywall alone Solid concrete or concrete block? Steel studs? ? Order the Steel Stud Kit: model EGHWSS. Sold online at ECHOGEAR.com or Amazon. UUHHH ?!? Unsure? Steel Stud Kit required (not included) to ... unless you WANT d an l fal TV ur yo tch wa crash onto the floor. Perfect! For questions, contact the Echogear pros: www.echogear.
What’s in the Box WARNING: DON'T FEED TO CHILDREN — This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included in this kit will be used. Parts FOR STEP 1 01 TV Screws (qty. 4 each) [Only one size fits your TV] M6 Washer 02 M6 x 12mm M6/M8 (qty.
Parts FOR STEP 2 Parts FOR STEP 3 Lag Screw 08 Drill Hole Template 06 (qty. 1) Securement Screw (qty. 4) 5/16 x 2 ¾ in. Washer (For Lag Screw) 09 M5 x 25mm 11 (qty. 4) (qty. 2) 5/16 in. Concrete For concrete installations ONLYAnchor CAUTION: Do not use in drywall or wood Concrete Anchors Wall Plate 07 (qty. 1) Parts FOR STEP 2C ** NOT INCLUDED ** Order the Steel Stud Anchor Kit: Model EGHWSS. Sold online at ECHOGEAR.com or Amazon. 10 (qty.
STEP 1 Attach the TV BRACKETS TO YOUR TV STEP 1.1 TV Screw Diameter Only one screw size fits your TV. M6 M8 r d uses fo "Suggeste : s screw the extra s, me piece board ga , y lr e w l je industria , rn holders o c t e e sw – ts n e m stru musical in s or ca ra a like m ' sticks, n o o s n 'mo rs, stuffe stocking t (not mos y currenc ) ..." countries 6 TV Screw Length STEP 1.
STEP 1.3 If your TV included inset spacers or wall mount adapters, see Troubleshooting (PAGE 20). Secure the TV Brackets a 05 04 NO SPACER 01 02 b SPACER NEEDED 01 02 03 CAUTION: Ensure TV brackets are equally centered on your TV AND securely fastened in place.
STEP 2 I nstall the Wall Plate For WOOD STUD INSTALLATIONS, follow STEP 2A on PAGE 10 Min. Wood Stud Depth: nominal 102 mm (4 in.) actual 89 mm (3 ½ in.) Min. Wood Stud Width: nominal 51 mm (2 in.) actual 38 mm (1 ½ in.) Min. Wood Stud Spacing: 406 mm (16 in. ) For For STEEL STUD INSTALLATIONS, CONCRETE INSTALLATIONS, follow STEP 2B on PAGE 12 follow STEP 2C on PAGE 14 CAUTION: Avoid potential personal injuries and property damage! Min. 203 mm (8 in.) Min. 203 mm (8 in.) Min. 406 mm (16 in.
STEP 2A STEP 2A.1 (For Wood Stud) Find a Stud Install the Wall Plate STEP 2A.2 Align the Template ay X-Recs Sp ld so tely ara p e s on ...
STEP 2A.3 Drill Holes STEP 2A.4 Secure Wall Plate 6.9 cm (2¾ in.) 08 07 09 5.5 mm Bit (7/32 in.) 06 06 10 CAUTION: Avoid potential personal injury or property damage! All four lag screws 08 MUST BE firmly tightened to prevent unwanted Go to STEP 3 movement of the wall plate assembly.
STEP 2B (For CONCRETE) STEP 2B.1 Align the Template Install the Wall Plate STEP 2B.2 Drill Holes 7.6 cm (3 in.) Min. hole S 610 mm pacing: (24 i n.) 10 mm Bit (3/8 in.) on ... "come me" h it level w 06 06 IMPORTANT: Never drill into the mortar between blocks.
STEP 2B.3 Insert Concrete Anchors STEP 2B.4 Secure Wall Plate 10 08 09 07 06 12 CAUTION: Avoid potential personal injury or property damage! All four lag screws 08 MUST BE firmly tightened to prevent unwanted Go to STEP 3 movement of the wall plate assembly.
STEP 2C STEP 2C.1 (For STEEL Stud) Find a Stud Install the Wall Plate STEP 2C.2 Drill Holes ay X-Recs Sp ld so tely ara p e s 25 mm (1 in.) 06 on ... "come me" ith level w 13 mm (1/2 in.
Install Anchors STEP 2C.3 a STEP 2C.4 Secure Wall Plate b S2 S3 S1 07 S1 c d 06 CAUTION: Avoid potential personal injury or property damage! All four lag screws S2 MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly.
STEP 3 Hang Your TV Attach Your TV STEP 3.1 04 05 HEAVY! You may need assistance with this step. of yours that "Ask that friendou t CrossFit" ab on s yammer 04 05 05 07 04 07 04 05 05 04 07 TIP: Tilt TV brackets 04 and 05 as shown for ease of installation.
STEP 3.2 Secure Your TV 07 07 04 11 05 IMPORTANT: BEFORE MOVING YOUR TV, securely tighten down screws 11 to properly install the assembly. CAUTION: Avoid potential personal injuries or property damage! Screws 11 must be installed to secure arms to wall plate tightening may be required. 16 07 .
Adjustments EXTEND / RETRACT If your TV doesn't extend or retract properly, remove your TV (See PAGE 19), then reinstall following STEP 3 on PAGE 16. LEVEL Your TV should adjust easily when moved, then stay in place. If your TV is too loose or too tight, adjust side tension knobs T . HK 04 IMPORTANT: BEFORE MOVING YOUR TV, securely tighten down screws 11 shown on PAGE 17, to properly install the assembly.
REMOVING THE TV TV LATERAL SHIFT Remove your TV BEFORE shifting side-to-side: HEAVY! You may need assistance with this step. "Don't be a hero!" 1. Loosen screws 11 to remove your TV from the wallplate. 2. Rehang your TV on the wallplate where desired (STEP 3). 3. Reinstall your TV and screws 04 11 (STEP 3).
Troubleshooting TV supplied spacers a: Use your TV supplied spacer for flat back TVs (AND you want your TV closer to the wall). NOTE: M8 screws can be used without the washer for extra thread engagement. FLAT BACK If you are uncertain about your hardware selection, contact Customer Service TV Supplied Spacers a b: Use your TV supplied spacer and spacer ● Round (irregular) back TVs 03 for: ● Extra space needed for cables NOTE: M8 screws can be used without the washer for extra thread engagement.
“Wanna show off your hard work? Share a picture of your completed project with #YourGearUpgraded. Who knows, it might not be as bad as you thought” Need Help? Contact the ECHOGEAR Pros: Milestone Global Headquarters 6436 City West Parkway Eden Prairie, MN 55344 USA Milestone AV Technologies EMEA Headquarters Po Box 191, 6000 AD Weert, The Netherlands Franklinstraat 14, 6003 DK Weert, Netherlands P: +31 (0) 495 580 852 1-855-428-2490 UK: (0) 00 056 2853 ECHOGEAR.com ECHOGEAR.