User Manual

"whichever
way your
mind works"
2 31 4
6 7
#YourGearUpgraded
Steel Stud Mounting Kit
Model EGHWSS
WARNING: DON'T FEED TO CHILDREN
—
This product contains small items that could be a choking hazard if swallowed. Verify all parts are
undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact the ECHOGEAR Pros. Never use damaged parts!
6901-602186 00
Milestone Global Headquarters • 6436 City West Parkway • Eden Prairie, MN 55344 USA
©2017 Milestone AV Technologies. All rights reserved. ECHOGEAR is a Milestone brand. ECHOGEAR and the ECHOGEAR logo are trademarks of Milestone.
CAUTION: Avoid potential personal injuries and property damage!
● This product is designed for use in steel stud walls - in conjunction with “tilting” or “low-profile fixed” TV mounts ONLY.
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
● If back side of wall is unfinished, drywall must be installed to a minimum of one stud left and right of the stud(s) being used to install any item.
● Drywall must be secured to studs with screws 12 in. (304.8 mm) on center.
● Drywall must be a minimum of 1/2 in. ( 13 mm) thick on each side of the studs, and a minimum clearance of 1
7
/
8
in. (48 mm) behind the wall is required.
● This product must be centered on the studs.
● Studs must be at least 2x4 / 25 ga. Stud type and structural strength must conform to the North American Specification for the Design of
Cold-Formed Steel Structural Members [362 S 125 18, C-Shape, S - Stud Section].
● If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this product,
contact the ECHOGEAR Pros or call a qualified contractor.
X-Ray
Specs
sold
separately
S1
S1
S3
S2
Yea, the boring stuff ... but read it, so you don’t jack things up!
"Your tilting or
low-profile fixed
TV mount here"
S3
x4
S2
x4
S1
x4
1/4-20 x 1 ¾ in.
1/4 in.
1/2 in. (13 mm)
Drill Bit Anchor Screw Washer
Screwdriver
Electric Drill
Pencil
Stud Finder
STUFF INCLUDEDGRAB YOUR TOOLS
1/4-20 Snap Toggle BB
1/4-20 x 1 ¾ in.
1/4 in.
Fasteners for mounting your TV into steel studs.
Call or chat with ECHOGEAR Pros 7 days a
week at 1-855-428-2490 or ECHOGEAR.com
"Steel Stud ... wasn’t
that your nickname
in High School?"
5