#YourGearUpgraded Full Motion Corner TV Mount Model EGCM1 LANGUAGES Visit: echogear.
IMPORTANT SAFETY INSTRUCTIONS. READ ENTIRE MANUAL PRIOR TO USE. SAVE These INSTRUCTIONS. Yea, the boring stuff ... but read it so you don’t jack things up! ies to “Appolog cks a J e th all rld” in the wo Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
Verify Your Wall Construction CAUTION: ? wood studs DO NOT install into drywall alone Contact The Echogear Pros (See Back Page) Perfect! tch your ... unless you WANT to wa floor. the o ont sh TV fall and cra UUUUHHH ?!? Unsure? Good to Go Grab Your Tools E Tape Measure Pencil Phillips Screwdriver Level Awl Electric Drill Inside Every Box e "collect th whole set" Hex Wrench HK 1/8 in.
What’s in the Box ... what's in the boooox WARNING: DON'T FEED TO CHILDREN — This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included in this kit will be used. STUFF FOR STEP 1 1 TV Screws (qty.
STUFF FOR STEP 2 Lag Screw 1/4 x 3 in. 5 6 qty. 1 qty. 2 Washer Wall Plate/Arm Drill Template 7 (For Lag Screw) qty. 1 8 1/4 in. qty. 2 Extension Brackets End Cap Wall Plate Covers Extension Screws M6 x 6mm 9 qty. 2 10 qty. 1 11 qty. 2 12 qty. 2 13 qty. 2 14 qty. 4 End Cap Screws M5 x 8mm 15 qty.
STEP 1 Attach the TV BRACKETs TO YOUR TV STEP 1.1 TV Screw Diameter Only one screw size fits your TV. M4 M6 M8 r d uses fo "Suggeste screws: the extra s, me piece board ga , l jewelry industria , rn holders o c sweet nts – TV Screw Length STEP 1.
1.
04 a 01 02 No Spacer b With Spacer 01 02 03 Alternate Spacer setups 8
STEP 2 I nstall the Wall Plate Determine Your Mount Location to Center Your TV in the Corner 2.1 The stud CENTER must be located at or between the MIN and MAX. STUD Standard MIN Maximum Distance from Corner 55 in. (140 cm) and under 6 in. (15 cm) 24 in. (61 cm) 60 in. (152 cm) 6 in. (15 cm) 24 in. (61 cm) 65 in. (165 cm) 9 in. (23 cm) 24 in. (61 cm) 70 in. (178 cm) 15 in. (38 cm) 24 in. (61 cm) 75 in. (190 cm) 21 in. (53 cm) 24 in.
CAUTION: 2.2 Find a Stud Avoid potential personal injuries and property damage! DO NOT Install in drywall alone. ay X-Recs Sp ld so tely ara p se Min. Wood Stud Depth: nominal 4 in. (102 mm) actual 3 ½ in. (89 mm) Min. Wood Stud Width: nominal 2 in. (51 mm) actual 1 ½ in. (38 mm) Max. Drywall: 5/8 in. (16 mm) Drywall covering the wall must not exceed 5/8 in. (16 mm). Minimum wood stud size: Nominal 2 x 4 in. (51 x 102 mm) actual 1 ½ x 3 ½ in. (38 x 89 mm). 10 Use a stud finder ... ...
2.3 Mark 2.4 3 in. (7.5 cm) Drill Secure Wall Plate 2.5 6 7 8 1/8 in. Bit (3 mm) 5 CAUTION: Avoid potential personal injury or property damage! Lag screws 7 MUST BE firmly tightened to prevent unwanted movement of the wall plate/arm 6 .
Attach Plate Covers 2.6 Assemble Extensions 2.
Assemble End Caps 2.8 Tighten Screws 2.
STEP 3 3.1 Hang Your TV Open the Safety Locks 4 4 IMPORTANT: Save the screws for STEP 3.
Hang Your TV 3.2 HEAVY! You may need assistance with this step. iend of "Ask that fr mmers ya yours that ssFit" ro C t on abou 4 11 4 12 4 6 6 IMPORTANT: TV brackets 4 MUST be centered span the faceplate of arm 6 . AND E ...
3.3 Secure Your TV Level and Lock 3.4 4 2X CAUTION: Avoid potential personal injury or property damage! Bracket clips and screws MUST be installed to the secure the TV in place. DO NOT OVERTIGHTEN.
Adjustments Tilt Your TV should adjust easily when moved, then stay in place. If your TV is too loose or too tight, adjust tilt lever T . NOTE: Once your TV is in place, tighten the tilt lever T to prevent unwanted movement. TO ADJUST THE TILT TENSION, first rotate (tighten or loosen) the tilt lever T as far as you can, then: T a Pull and hold lever T . Righty Tighty to LOOSEN b to TIGHTEN Rotate lever T in the opposite direction (as shown). c Release lever T .
Level REMOVE YOUR TV HEAVY! You may need assistance with this step.
placement chart - - based on TV Width Measure the OUTER edges of your TV (not the diagonal). TV WIDTH MIN MAX (-) 30 in. (76 cm) 30 in. (76 cm) * 6 in. (15 cm) 20 in. (51 cm) 6 in. (15 cm) 20 in. (51 cm) 31 in. (78 cm) 6 in. (15 cm) 24 in. (61 cm) 32 in. (81 cm) 6 in. (15 cm) 24 in. (61 cm) 33 in. (84 cm) 6 in. (15 cm) 24 in. (61 cm) 34 in. (86 cm) 6 in. (15 cm) 24 in. (61 cm) 35 in. (89 cm) 6 in. (15 cm) 24 in. (61 cm) 36 in. (91 cm) 6 in. (15 cm) 24 in. (61 cm) 37 in.
“Wanna show off your hard work? Share a picture of your completed project with #YourGearUpgraded. Who knows, it might not be as bad as you thought” "Now put yourself in time out" Confuzzled? Contact the ECHOGEAR Team 7 days a week: Legrand AV Inc. Legrand AV Netherlands B.V. Legrand Australia 6436 City West Parkway Eden Prairie, MN 55344 USA Franklinstraat 14 6003 DK Weert, Netherlands Unit 20 / 33 Meakin Road Meadowbrook QLD 4131, Australia P: 1-855-428-2490 helpme@ECHOGEAR.