GET MORE GEAR! Use code BUCKLE15 for 15% off your next purchase at echogear.
IMPORTANT SAFETY INSTRUCTIONS. READ ENTIRE MANUAL PRIOR TO USE. SAVE These INSTRUCTIONS. Yea, the boring stuff ... but read it so you don’t jack things up! s to “Apologie s ck all the Ja ” rld in the wo Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV owner’s manual to see if there are any special requirements for securing your TV.
Weight Restrictions Verify Your Wall Construction If securing the strap to a wall. 200 lbs. (90.7 kg) Your TV (plus accessories) CANNOT EXCEED CAUTION: wood stud DO NOT 200 lbs. (90.7 kg) install into drywall alone for this product. t it ... think abou “You can n’t do it.” oo oo d ut b Perfect! Drywall will not secure your TV Good to Go 7/16 in. (12 mm) Electric Drill Socket Wrench 1/8 in. (3 mm) Wood Drill Bit 3/32 in. (2.
What’s in the Box ... what’s in the boooox WARNING: DON'T FEED TO CHILDREN — This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used. For securing the strap to your TV TV Screws 03 qty. 2 each Only one size fits your TV.
For securing the strap to furniture Furniture with a pre-drilled hole with threaded insert 1/4-20 Screw 06 For securing the strap to a wall Wood furniture #10x1 Wood Screw qty. 1 07 1/4-20 x 1/2 in. #10 x 1 in. Washer (Lag Screw) 09 Metal furniture qty. 2 1/4-20 Metal Screw 08 qty. 1 qty. 1 1/4-20 x 1/2 in. Lag Screw 10 qty. 2 5mm 1/4 in. 1/4 x 2.0 in.
How Do You Want To Mount This Thing? PREFERRED METHOD: OPTIONAL METHOD – A: OPTIONAL METHOD – B: Attach to your TV (STEP 1), to your furniture (STEP 2), AND to the wall (STEP 3). Attach to your TV (STEP 1), AND to the wall (STEP 3). Attach to your TV (STEP 1), AND to your furniture (STEP 2).
STEP 1 1.1 Attach the Anti-Tip Strap to Your TV For All Mounting Methods Select TV Screw Diameter Only one screw size M6 (PAGE 6) M8 03 fits your TV. a screws: r the extr d uses fo te es g ug "S elry, ustrial jew ieces, ind ts – p e am ru g inst men board s, musical stocking rn holder , ks co t ic st ee ' sw nsoon ..." as or 'mo countries) like marac (not most cy en rr cu stuffers, NOTE: If your TV included inset spacers or adapters, use them UNDER the mount hardware.
1.2 Attach TV supports to your ... uuumm TV Install TV supports T of anti-tip strap washers 04 and spacers 05 . 01 , into the BOTTOM holes of your TV using your selected screws Spacers 05 (if needed) are stackable CAUTION: Avoid potential injuries or property damage! • TV supports T must be attached to the to BOTTOM most mounting holes on the back of your TV. T T • Do not use screws 03 without washers 04 . 8 • Do not use power tools for this step and DO NOT overtighten the screws 03 .
STEP 2 Attach the Anti-Tip Strap to Your Furniture For Preferred Method and Optional Method-B (PAGE 6) Option 2a Option 2b Option 2c For Furniture with a Pre-drilled Hole with Threaded Insert For Wood Furniture For Metal Furniture Go to OPTION 2a, on PAGE 10 Go to OPTION 2b, on PAGE 11 Go to OPTION 2c, on PAGE 12 9
Option 2a 2.1a Furniture with Pre-Drilled Holes Locate Threaded Insert 2.2a Secure P 01 10 06 CAUTION: Avoid potential injuries or property damage! Ensure mounting plate P is securely fastened to the furniture. Go to STEP 2.
Option 2b 2.1b Wood Furniture 2.2b Make a Hole Secure P 1 in. (26 mm) Deep 3/32 in. (2.4 mm) Bit 01 IMPORTANT: Pilot holes must be drilled to a depth of 1 in. (26 mm). 07 CAUTION: Avoid potential injuries or property damage! Ensure mounting plate P is securely fastened to the furniture. Go to STEP 2.
Option 2c 2.1c Metal Furniture 2.2c Make a Hole P 1/2 in. (13 mm) Deep 15/64 in. (6 mm) Bit 01 IMPORTANT: Pilot holes must be 12 Secure drilled to a depth of 1/2 in. (13 mm). 08 CAUTION: Avoid potential injuries or property damage! Ensure mounting plate P is securely fastened to the furniture. Go to STEP 2.
OptionS 2a / 2b / 2c 2.3 Tighten the Straps S S 01 CAUTION: Avoid potential injuries or property damage! Ensure all three straps S are tight.
STEP 3 Attach the Anti-Tip Strap to the Wall For Preferred Method and Optional Method-A (wood stud only) (PAGE 6) CAUTION: Avoid potential personal injuries and property damage! • Drywall covering the wall must not exceed 5/8 in. (16 mm). • Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1 ½ x 3 ½ in. (38 x 89 mm). • Stud center must be verified. 3.1 Find a Stud 3.2 ay X-Recs Sp ld o s tely ara sep Use a stud finder... 14 ...
3.4 3.5 Secure 3.6 Hook 09 Tighten 02 10 S 01 01 02 H 02 H CAUTION: Improper use could reduce the holding power of the lag screw. Do not overtighten the lag screw 10 . CAUTION: Avoid potential injuries or property damage! Ensure strap S is tight. NOTE: To move your funiture, loosen the straps S and then unclip the strap hook H from the wall bracket 02 .
“Wanna show off your hard work? Share a picture of your completed project with #YourGearUpgraded. Who knows, it might not be as bad as you thought”. Legrand AV Inc. 6436 City West Parkway Eden Prairie, MN 55344 USA Legrand AV Netherlands B.V. Franklinstraat 14 6003 DK Weert, Netherlands P: 1-855-428-2490 P: +44 (0) 800 0568188 helpmehelpyou@ECHOGEAR.com helpme@ECHOGEAR.com ECHOGEAR.com ECHOGEAR.com Legrand AV Inc.