#YourGearUpgraded Single Screen Monitor Mount for Gaming INSTRUCTION MANUAL Model Echo-gm1Fc
IMPORTANT SAFETY INSTRUCTIONS. READ ENTIRE MANUAL PRIOR TO quest. SAVE These INSTRUCTIONS. Before You EmBark on your Quest... just read it so you don’t get pwned! Please read through these instructions completely and check your monitors' owner manual to see if there are any special requirements for mounting your monitor. "Hopefully you are unscathed after detonating the mount from the packaging!...
Size up Your Mounting Surface 0.8 in. - 2.6 in. DESKTOP THICKNESS (20 mm - 66 mm) ? UUUUHHH ?!? Unsure? Contact The Echogear Pros: 1-855-428-2490 www.echogear.com "No snapinr o pics f er twitt r til you!" done Yo Hands BOnus Loot! 3 FREE Inside Every Box Hex Keys 3/16 A 5/32 B "Ph the il is bos s" Phillips Screwdriver 3/32 C A A h" .K.
ONE MORE THING ... Echogear Satisfaction Guarantee: We’re driven to give DIYers an awesome install experience. We stand behind everything we make because you deserve the best entertainment experience without sacrificing quality and spending your whole paycheck. Guess what? We’ll help you through the entire process, too. Why? Because we like to help and it’s our passion to provide authentic service. We won’t leave you hanging, no matter what. Our U.S.
Here's your Loadout WARNINGS: DON'T ALLOW CHILDREN TO FEED ON CONTENTS AND NEVER USE DAMAGED GOODS! ►► This product contains small items that are a choking hazard if swallowed. ►► Before you start assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
Gear FOR Level 3 1 Cable Covers 6 7 2 Screws 8-32 x 3/8 in 8
Level 1 Lock N' LOAD! Clamp Mount to Desk STAGE 1: Plaster Soft Bumpers +5 on Desk Clamp 1 2 7
STAGE 1: Loosen Screw on Mount to Lower Clamp 1 A a A b 8 USE HEX KEY A TO LOWER CLAMP.
STAGE 2: Tighten Screw To Attach Clamp to Desk 1 A a A b USE HEX KEY A TO SECURELY CLAMP IT DOWN.
Level 2 Make The DROP! Attach Monitor to Mount STAGE 1: Determine Screw Length and Spacer Size NOT NEEDED NEEDED FOR Flat Monitor Flat Monitor Select Spacers Cables + or (if needed) Short Screw Select Screws Inset Holes Long Screw 3 4 or Bracket Bracket 5/6 Spacer 10 Round Monitor
STAGE 2: Partially Insert Top Screws into Monitor 3 OR 4 5/6 11
STAGE 3: Hang Monitor by Top Screws onto Bracket 1 12
STAGE 4: Insert Bottom Screws and Tighten All Four Screws 3 1 R OR 4 5/6 "Batt en do wn th e hat ches" IMPORTANT: YOU SHOULD TEST THE TENSION OF THE ROTATING BRACKET R TO ASSURE THE MONITOR MOVES WITH EASE AND STAYS IN POSITION BEFORE TIGHTENING ALL SCREWS. See page 17 to adjust brackets tension.
Level 3 Control the Melee! Route and Disguise Cables STAGE 1: Route All Cables Through Arm Bracket C 1 NOTE: FOR THICKER CABLES USE HEX KEY C TO LOOSEN SCREWS S ON ARM BRACKET AND SLIDE BRACKET OUT.
"U R A BOSS" STAGE 2: Secure Cables with Arm Cover+ 1 1 IM P O R T A N T : LEAVE ENOUGH SLACK IN THE CABLES TO ASSURE THE MONITOR AND ARMS MOVE WITH EASE. nts. Then adjustme f your r e p ro p o e "Make th post some pics to add: to it's time on.
Bonus Level! Adjustments /Modifiers Vertical Position - Adjust Monitor Up and Down TIP: INITIALLY, NEARLY ALL MONITORS WILL REQUIRE POSITIVE ADJUSTMENT (UP TO 20 TIMES). IF THE MONITOR IS NOT STAYING AT DESIRED HEIGHT OR NOT MOVING WITH EASE: • ADJUST TENSION SCREW ON THE TOP OF THE MOUNT. • START BY TURNING 5 OR 6 TURNS, = MORE TENSION OR = LESS TENSION. • REPEAT TURNS UNTIL DESIRED TENSION IS ACHIEVED. NOTE: YOU MAY NEED TO ADJUST HEIGHT OF ARM TO GAIN ACCESS TO SCREW.
Tilt & Level - Tilt and Turn Monitor 360 0 D on ... "Come ith me..." level w WARNING: MONITOR MUST REMAIN OVER DESK SURFACE. IF MONITOR DOES NOT MOVE WITH EASE OR WILL NOT LOCK INTO DESIRED POSTION: Remove the monitor. Turn the screw D on the tension bracket either counter-clockwise (loosen) or clockwise (tighten) D . Repeat as needed.
Horizontal Position - Adjust Monitor Left or Right WARNING: MONITOR MUST REMAIN OVER DESK SURFACE.
How to remove Mount from Monitor and Surface 1. Remove Cables 2. Remove Monitor 3.
“Wanna show off your skillzz? Share a picture of your completed mount with #YourGearUpgraded. Who knows, it might not be as bad as you thought” Confuzzled? Contact the ECHOGEAR Pros: 1-855-428-2490 helpmehelpyou@ECHOGEAR.com ECHOGEAR.com Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.