x7722271404 / x772000164 99944200595 PAS Articulating Hedge Clipper Attachment FOR MODELS: SRM-2100SB, 2400SB, 210SB, 211SB, 225SB, 260SB, 261SB, PAS-2100, 2400, 2601, 210, 211, 225, 225VP, 225VPB, 230, 231, 260, 261, 265, 266 Operator’s Manual Users of this equipment risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. ECHO provides an operator’s manual and a safety manual. Both must be read and understood for proper and safe operation.
TABLE OF CONTENTS 99944200595 TABLE OF CONTENTS Table of Contents .............................................................................................................................. 2 Introduction ........................................................................................................................................ 3 The Operator’s Manual ................................................................................................................ 3 The Safety Manual.........
99944200595 INTRODUCTION INTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual and the SAFETY MANUAL. You will find both easy to use and full of helpful operating tips and SAFETY messages. The Operator’s Manual Keep it in a safe place for future reference. Contains specifications and information for safety, operation, maintenance, storage and assembly specific to this product.
SAFETY 99944200595 Additional or Replacement Manuals Replacement Operator, Safety Manuals, and Parts Catalogs are available from your ECHO dealer or at www.echo-usa.com or by contacting ECHO Inc., 400 Oakwood Road, Lake Zurich, IL 60047 (800-673-1558). Always check the ECHO Web Site for updated information. Safety Videos are available from your Echo dealer. A $5.00 shipping charge will be required for each video.
99944200595 SAFETY International Symbols Symbol Description Symbol Description Symbol Description Symbol Description Warning, See Operator’s Manual Safety/Alert DO NOT USE BLADES - Line Head Only Wear eye, ear and head protection Finger Severing Plan retreat pathfromfalling objects Wear hand and foot protection Rotating Cutting Attachment AVOID KICKOUT. Keep bystanders at least 15 meters (50 feet) away.
SAFETY 99944200595 Hearing Protection ECHO recommends wearing hearing protection whenever unit is used. Proper Clothing Wear snug fitting, durable clothing; • Pants should have long legs, shirts with long sleeves. • DO NOT WEAR SHORTS, • DO NOT WEAR TIES, SCARVES, JEWELRY, or clothing with loose or hanging items that could become entangled in moving parts or surrounding growth. Wear sturdy work shoes with nonskid soles; • DO NOT WEAR OPEN TOED SHOES, • DO NOT OPERATE UNIT BAREFOOTED.
99944200595 SAFETY Repetitive Stress Injuries It is believed that overusing the muscles and tendons of the fingers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome (CTS), which could occur when your wrist swells and squeezes a vital nerve that runs through the area.
SAFETY 99944200595 Keep a Solid Stance • Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach. Cutting Angle Adjustments • Only adjust cutting blade angle with unit flat on the ground, with the engine stop switch in the “STOP” position. Never adjust cutting angle with unit standing upright. Avoid Contact With Gear Box Assembly During Use • Gear box assembly becomes hot during use.
9944200595 DESCRIPTION DESCRIPTION Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information. 3 4 8 2 5 Shaft Label 1 3 6 7 1. CUTTING BLADES - Double reciprocating blades mounted to a blade support bar. Double sided blades, are capable of cutting on either side of the blade. 2.
CONTENTS 99944200595 CONTENTS The ECHO product you purchased has been factory pre-assembled for your convenience. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.
99944200595 ASSEMBLY ASSEMBLY Power Head Shaft/Lower Shaft Assembly Do not perform maintenance or assembly procedures with engine running. Parts Required: PAS Power Head w/Shaft & Coupling 1. Set Power Head/Shaft Assembly on a level surface. B 2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock-out position. D 3. Remove vinyl cap from attachment drive shaft. 4. Remove cardboard spacer, if necessary. 5.
OPERATION 99944200595 OPERATION Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a completestop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Note: Refer to your Pro Attachment Series or Split Boom Operator's Manuals for correct engine fueling, starting and stopping instructions.
99944200595 OPERATION 5. Rotate blades to desired cutting position and hold in place. 6. Turn indexing ring ¼ turn to lock blade in place. B Gear case assembly becomes HOT during use. Always grip assembly at blade-adjustment handle when making cutting angle adjustments, otherwise serious injury may result. C Always install blade cover, and return cutting assembly to folded/locked position for travel/storage.
OPERATION 99944200595 Hedge Clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid touching blades whenever possible, and always wear gloves to protect hands. 1. Always grip throttle handle with right hand and support handle with left hand while trimming. 2. Hold trimmer firmly and squeeze throttle trigger to accelerate engine. 3. Tilt trimmer so cutting teeth are angled slightly toward the hedge or shrub and proceed to cut.
99944200595 MAINTENANCE MAINTENANCE Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces.
MAINTENANCE 99944200595 1. Brush loose debris from blade and coat both sides of blade with the 50-50 cleaning mixture. 2. Allow cleaning mixture to soften the remaining gummy residue then wipe it from the blade. 3. Apply clean oil to the entire length of the blade. Be certain the blade bolts are lubricated. 4. Wipe excess oil from the blade before putting the unit back in service. Gear Case Level 1. Parts Required: POWER BLENDXTM 14 oz. or Lithium Base Grease. 1. Clean dirt from the grease fitting (A).
99944200595 MAINTENANCE 4. Align the locating screw hole in gear case with the locating hole in drive shaft assembly, install and tighten locating screw (A), and tighten clamping screw (B).. C Flat edge of washers (D) must be against drive shaft. Blades Blades should only be removed and reinstalled by an Authorized ECHO Servicing Dealer, otherwise premature wear or internal damage may occur. Sharpening Level 2. Parts Required: none Hedge Clipper blades are very sharp.
MAINTENANCE 99944200595 7. Lubricate blades (see “Lubrication”). 8. Connect spark plug wire. Adjustment Level 2. Parts Required: none Hedge clipper blades are very sharp. Touching them may lead to severe personal injury. Use long hex wrenches and sockets with extensions when tightening blade screws and blade locknuts to keep hands at a safe distance from sharp blades. 1. Tighten blade screws. (A) securely 2. Hold blade screws (A) to prevent turning, and tighten locknuts (B).
99944200595 STORAGE STORAGE Always store and transport hedge clippers in a stable position. Support gear case and cutting blades to prevent excessive flexing which may cause damage to the cutting attachment. Always install blade cover when transporting or storing unit. 1. Clean and lubricate cutting blades and gear case.. 2. Sharpen cutting blades as required. 3. Apply a light coating of clean 20W engine oil along entire length of blades and on blade bolts. 4.
SPECIFICATIONS 99944200595 SPECIFICATIONS MODEL 99944200595 Length 1016 mm (40.0 in.) Attachment Width 132 mm (5.2 in.) Attachment Height 127 mm (5.0 in.) Weight 2.76 kg (6.08 lb.) Gear Case Ratio 4.072 : 1 Cutter Double Riciprocating Blade - Double Edge Effective Length 464 mm (18.3 in.) Pitch 35 mm (1.4 in.) Maximum Diameter Cut Soft Material 25.4 mm (1 in.) Woody Material 13 mm (1/2 in.) 20 X7532095606 © 08/2013 ECHO Inc.
99944200595 WARRANTY STATEMENTS WARRANTY STATEMENTS ECHO LIMITED WARRANTY STATEMENT FOR PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010 ECHO'S RESPONSIBILITY ECHO Incorporated’s Limited Warranty, provides to the original purchaser that this ECHO product is free from defects in material and workmanship.
99944200595 PURCHASED REPAIR PARTS, SHORT BLOCKS AND ACCESSORIES & GJ* * & ^J* ATTENTION TWO-STROKE ENGINE POWER PRODUCT OWNERS This ECHO two-stroke engine power product is a quality-engineered unit which has been manufactured to exact tolerances to provide superior performance.
99944200595 NOTES NOTES X7532095606 © 08/2013 ECHO Inc.
ECHO, INCORPORATED 24 400 Oakwood Road Lake Zurich, IL 60047 www.echo-usa.