User's Manual

ManualsBrandsEccel Technology ManualsCamera & PhotoAction Cam user interface unit

Actioncam User Interface RFID Unit

User Manual

V1.2

23/07/2020

Table of Contents

1. Device overview ............................................................................................................................................2

2. Electrical/Power ............................................................................................................................................3

3. PoE/ LAN Connection........................................................................................... Error! Bookmark not defined.

4. Device operation ...........................................................................................................................................4

Summary of content (4 pages)

PAGE 1
Actioncam User Interface RFID Unit User Manual V1.2 23/07/2020 Table of Contents 1. Device overview ............................................................................................................................................2 2. Electrical/Power ............................................................................................................................................3 3. PoE/ LAN Connection................................................................................
PAGE 2
1. Device overview RFID antenna 7”LCD screen Picture 1.
PAGE 3
RJ45 connector (LAN/PoE) GPIO header Picture 1.2 – Angled Rear View 2. Electrical/Power The device shall be powered by using the RJ45 Ethernet connector using a supply meeting the PoE standard. Maximum power consumption is 5W. 3. PoE/LAN Connection The device is powered by the PoE connector. Network configuration should be provided by the DHCP server.
PAGE 4
. Device operation If the device network is configured properly, the unit should connect to the host server and display some images in a loop. When a RFID tag, ICODE or Mifare, is presented in front of the LCD, the device should generate acoustic feedback (a beep) and display images supplied by the server as a response. The device operates as a terminal to display messages to the user sent over the Ethernet LAN connection from the server.