Installation Guide

Installation guide

TLJ Invisible lock set V1.3

TLJ Group Ltd, HQ, 68/78 Leads Road,

Hull, East Yorkshire, HU7 0BY, UK

4pcs Handle

Fixing Screws

2pcs screws for Lock case

2pcs Lever

Spindles

Declaration of Performance can be found

at www.TLJlimited.com

4 x AA Batteries

4pcs screws for cylinder

escutcheon

Not Included but required

European prole cylinder with Thumbturn

Lever on rose, if

an alternative lever

is used, ensure it is

‘bolt-through’ type

with vertical

xing screw

positions.

Escutcehon

plate

Indicator

Peeper

Insert TLJ Invisible

lock case into door

Faceplate

Fore end

Please Note: Alternative lever & escutcheon

may be used, and keeper may be radial.

PAGE 1
Installation guide TLJ Invisible lock set V1.3 4pcs Handle Fixing Screws 2pcs screws for Lock case 2pcs Lever Spindles 4pcs screws for cylinder escutcheon 4 x AA Batteries Not Included but required Please Note: Alternative lever & escutcheon may be used, and keeper may be radial. European profile cylinder with Thumbturn Lever on rose, if an alternative lever is used, ensure it is ‘bolt-through’ type with vertical fixing screw positions.
PAGE 2
Installation guide TLJ Invisible lock set V1.3 Drilling/Routing Template (Please note drawings NOT to scale) Standard Invisible Drilling Holes IMPORTANT Ensure holes drilled, machined in the door match TLJ fitting template exactly. Any difference will void fire test evidence MORTISING WITHIN DOOR Door Edge 6.50mm FACEPLATE 22mm 70mm OUTSIDE OF DOOR 120mm 21mm Thickness of Lock case, including Intumescent fire paper allowance 6mm INSIDE OF DOOR 138mm 115mm 376mm 10mm 376.00mm 10mm 18.
PAGE 3
Installation guide TLJ Invisible lock set V1.3 Operating Guide (Based on using the TLJ Qlite or Qcloud platform) RFID Contactless The TLJ Infvisible lock set can be operated via RFID (radio frequency identification) Specifically MiFare 13.56Mhz key cards, key fobs, wristbands or even sticker tags. “be e p” If the RFID credential is valid when presented to the front panel it will sound a “beep” and activate the motor so the lever can be rotated downwards and in turn retracts the latch.