The operation manual of terminal for the driver 2007. 01 .
The manual of bus terminal Operati on key Route Function Input driver’s ID Inquiry Used in detail, number of undelivered details, operation information Setting Terminal installation & information inquiry Functio n ▼ Adult Trouble Empty Red Status contents Entry Validator communication status indication Yellow Exit Validator communication status indication Green GSM communication status indication Blue White V2.
Bus card system structure GPS antenna & LAN external antenna Entry Guidance Exit Validator Validator broad cast RS-232C RS-232 오전 시내 11/01 04 : 00 : 00 수원역 , 애경 백화점 앞 1234 : 5 뒤 5678 : 5 분 분 안전운전 하세요! Driver’s terminal wireless LAN ADSL Company HOST manageme nt system 2
Bus terminal structure & explanation Main function of terminal Driver’s terminal Entry Validator ¾ Display the amount of card transaction ¾Control HO ¾ Provide bus stop guidance broadcast of distance information amount of card ( Passenger check ) ¾ Output various error messages ¾ Provide information between the bus ¾ Display the transaction Exit Validator & ¾ Voice index ] output ¾Input getting (1DOOR) ¾ Transmit transaction detail ¾ Display time 3 amount of card ( Passenger check
Understanding of getting on & off terminal structure Bus terminal can deal with getting on and off simultaneously.
Service start & Route change method 1. Service start Safe Safedriving Driving v03.70 V3.01 A Linea : 7777 Bus : 1234 차량번호 : 761234 07/19 18:09:57 Driver’s ID input Driver ID input Initial screen As terminal is turned on, bus company vehicle number & route registered already on the initial screen are displayed.
Service ending method 1. Service ending method 오 A 전 시 09/30 내 Driving 12 : 00 : 00 Driving end 운행 종료 Method is pushed Would you 운행을 종료 like to end 하시겠습니까? the driving? 경기도 앞 5678 뒤 9123 : 5 : 분 5 Method Check is pushed If it is wrong pushed 분 카드를 대주세요 01/01 04:00:00 [ 32 ] Cancel is caution) Fare is transmitted when the service is ended. 2. Initial screen, Service standby status 안전 Safe운전 Driving v03.70 V3.
Card transaction for single fare 1. Card transaction method after starting service Card processing 승객 구분 : 일 반 Passenger division : 승차 800 원 adult금액 : Fare : 800 Screen explanation Entry Validator normal card transaction screen 1. Transaction amount on the upper part 1. Passenger division 800 4200 1) Adult 2.
Service area fare card processing 1 1. Service area fare choosing method Fare selection Service area fare selection 요금input 입력 method 방식 선택 screen 오전 시외단축 09/30 1. Short cut key input 1. 단축키 입력 방식 2. Fare input Inner city Outer city is pushed and A 12 : 00 : 00 Short key using selection screen Outer city short cut key is indicated on the upper part 정류장명 : 경기도 2. 요금 입력 앞 5678 : 5 분 뒤 9123 : 5 분 . choose 1 or 2 Safe driving 2.
Service area card processing 2 3. Fare input method card processing 요금 입력Fare input Fare input card processing Input the amount numbers and [ [ 1200 ] 1200 ] 1150원 1150 Please put the card 카드를 대주세요 Check using 카드 처리 Passenger 승객 구분 : division 일 반 : adult Screen explanation Processed after “beep” Fare : 1150 승차 금액 : 1150 원 is pushed. Card transaction amount is displayed •For upper part, cash • For lower discount fare part, card ☞ Caution for service area fare processing 1.
HO processing method 1 1. Single fare HO processing method 다인승 입력 HO input adult 일반 child 다인승 처리 Number of [adult, teenager, child] is pushed and 02 teenager Screen explanation 01 Check is pushed 02 01 승객 구분 : division 일 반 : adult Passenger Fare : 2500 승차 금액 : Screen explanation If HO is pushed, it will be discounted automatically as HO. 2500 원 청소년 total : 401 person 2500 어린이 01 Total : 4 person 2500 ex) adult 2, teenager 1 and, child 1 are selected 2.
HO processing method 2 2.
Inquiry function 1. Inquiry method at the initial screen 안전 V3.01 A Safe운전 Driving v03.70 DATA 조회 DATA inquiry Inquiry function Inquiry function is possible in the standby status. 노 선 :Linea 경기도 1234 번 : 7777 차량번호 Bus: 761234 : 1234 In driving status, Cancel is pushed, standby will be done. 1.설치현황조회 1.Installation status inquiry Inquiry function In standby status, Inquiry 2.Transmit data 2. 미전송 DATA Is selected. 3. Profit inquiry 3. 수입금 조회 4. Card used in detail inquiry 4.
Bus stop change method 1. Bus stop correction method 오전시내 09/30 V3.01 A 12 : 00 : 00 경기도 앞 5678 : 5 분 뒤 9123 : 5 분 Bus stop method correction Bus stop Bus stop ▲ ▼ Manual bus stop selection 수동 정류장 선택 Bus stop change selection ▲ Suwon station, Ekyung ▲ 수원역 , 애경백화점 are used to correct the bus departmentstore stop Dongnam Apt 동남아파트 ▼ Pyong dong ▼ 평동 Check is pushed after certain bus stop is selected Safe driving ☞ Bus stop change contents 1.
Function 1 KEY explanation 1. Time setting Terminal management 단말기 관리 1.Time설정 setting 1.시간 2. Volume control Time 시간 setting 설정 Screen explanation 11/01 2323 : 00 : 00 11/01 : 00 : 00 Function is used to 2005 Nov 1 ▼ Year, month and day are 3. GPS , GSM status pushed 3. GPS , GSM 상태 11 : 05 : 00 check and change function in the screen. Screen explanation Year, month and day are inputted and Check Is pushed 2005 년 11월01일 Check 11 : 05 : 00 확 인 2.
Operation information transmission screen 1. Operation information transmission screen 안전 운전 Safe Driving v03.70 V3.01 A Download in progress Fare information file >>>>> 50% 안전운전 Safe Driving v03.70 V3.01 A Screen explanation Driver’s terminal communicates with computer in three minute interval.
Setting KEY explanation 1. Setting information menu Mode selection 모드 선택 Operator 1. 1. 운용자 모드 mode 2. Manager mode 3. Vehicle installation Operator menu 운영자 메뉴 Screen explanation There are three different modes and engineers and person in charge use 1 or 3 . After selection is done, check is pushed registration 1. Setting detail 1. 설정내역 확인check Screen explanation Until 1~5 with numbers 2. Operation information check 3. Version information 4. BL . PL information 5.
Operator menu explanation Operator menu selection display screen 1. Setting in detail Driver terminal ID 2. Operation information check 3. Version information 4. BL/PL check 5. Terminal check Transportation Businessman ID Name of transportation businessman Kernel version Fix B/L version 1. Memory check Driver terminal version Fixed capacity 2. Key pad check Exit Validator Route ID Entry Validator version Changed B/L version 3.
Caution for the driver Checking method & matters to be attended Status Before starting service During service Checking items Measure 1. Check route number and vehicle number on the driver’s terminal screen Route number re-input 2. Check present time comparing with year, month and day on the lower part of driver’s terminal If time is not correct, service will begin after notifying to the person in charge 3. Check whether light is on driver, getting on and Exit Validator 4.
Terminal circuit connection method 1 Driver’s terminal Electric power AMP BOX LAN GPS Reserve Guidance Getting on Driver MAIN broadcast Electrical power Reserve Getting on communication LAN : LAN antenna connection Reserve : reserve port GPS : GPS antenna connection Electrical power : electrical power (connect between AMP and driver) Guidance broadcast: guidance between AMP and driver) broadcast (connect Getting on: getting on electrical power (connect between driver and getting on) Driver
Terminal circuit connection method 2 Entry Validator Exit Validator Getting Getting on Getting Getting on S/W FUSE off S/W off FUSE Getting off Reserve electrical power Reserv e Getting on electrical power Getting on Getting off communication communication Getting off electrical power Getting off communication Getting on S/W : Getting on electrical power switch Getting off electrical power : Getting off electrical power (connect with Getting on and getting off) Getting on FUSE : Getting
GPS antenna and LAN antenna installing method Installing method Working contents 1. Make a hole after removing getting on or driver’s lamp 2. Insert GPS and LAN antenna line. 3.Do silicon process distancing 30cm from current GPS and LAN antenna. 4. Do silicon process in the hole. 5. Re-assemble getting on or driver’s lamp after tidying up lines.
Getting on & off electrical power and communication cable installing method Exit Validator From getting on to getting off, electrical power and communication cable is exposed internally and it has to be molded to complete ( red line) Mold board is fixed before molding cover is put on.
Caution 1 1. Old terminal removal 4. Entry Validator installation ¾ Write vehicle number on the terminal removed. ¾ Choose location not to cover sight. ¾ Piece has to be tidied up .(flat tire) (Passenger getting on ) ¾ Choose location when coins are paid. ¾ Do not remove old circuit for using new terminal. ¾ Do not change location of getting on and getting off communication line. 2. AMP installation ¾ Do not change location of getting on and getting off electrical power.
Caution 2 1. Circuit arrangement 3. Tidying up ¾ Arrange circuit not to expose. ¾ After installation clean up the wastes and internal materials left. ¾ Cut the sharp sedge after cable is tied. (safety accident) ¾ Do not leave the piece outside of the vehicle. 4. Registration 2. GPS/ LAN antenna installation ¾ Input vehicle number correctly. ¾ Do silicon process not to get the water in after inserting circuits. ¾ After registration. Check whether vehicle number and route number is matched.
Terminal installation registration method 1 1. Terminal installation registration Mode selection 모드 선택 Screen explanation Screen explanation Operator 1.1. 운용자 모드mode After selecting [3] Push password 1472 “ Manager 2.2. 관리자 모드mode Check 비밀 번호 입력 Input password is pushed Vehicle 3.3. 차량 설치 installation 등록 [ 1472 ] [ 1472 ] Cancel Is used to correct error registration 2.
Terminal installation registration method 2 3. Vehicle number registration Vehicle ID 확인 check 차량 ID 설치 등록 중 Safe Driving v03.70 Screen explanation : 141XXXXXX 버스Bus ID :ID 141XXXXXX .
Terminal installation registration method with USB1 Copy the program with USB to main computer o Input USB device into USB port in the main computer Input either USB port o “KN_U2D initializing” program is executed.
Terminal installation registration method with USB2 Copy the program with USB to main computer Select below “O” menu ⑤ ① ② ③ ④ Operation sequence 1. Select initializing. 2. Select transportation businessman. 3. Select vehicle. 4. Select all. ⑥ 5. Select CONNECT. 6. When all above is selected in the sequence, all vehicle number will be moved to the right. 7.
Terminal installation registration method with USB3 USB copy completed o when above message is shown, check will be o when “Close” is clicked, program is closed 29 clicked.
Terminal installation registration method with USB4 o To remove USB device from main computer safely, “reject” or “”hardware separation” is executed On the left arrow will be clicked twice USB capacity storing device will be selected If it is selected [stop] will be selected 30
Terminal installation registration method with USB5 This screen is displayed as USB capacity storing device is selected Push [check] When this screen is displayed ,USB memory is stopped so that USB memory can be pulled out.
Terminal installation registration method with USB6 1. USB installation selection USB operation V002 USB 작업 V002 Screen explanation USBUSB installation 설치 Screen explanation [1] is selected and 1. USB installation 1. USB 설치 It is the screen installation Do you want to start 2. USB UP,DOWN USB is inserted on the top USB installation ? 3. USB reserve vehicle of driver’s terminal registration 4. USB 예비차 해제 Select[1] and 4.
User’s Information 1. Cautions Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. FCC compliance Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received. Including interference that may cause undesired operation. 3.
Thank you!! Thank you 34