Installation Manual

ManualsBrandsEaton ManualsConnection AdaptersETN Power Xpert Multi

Contents

Description Page

Product Overview .........................2

Ordering Information .......................2

Material Selection – Example ................4

Meter Base ..............................5

Meter Base Assembly ......................5

Voltage Inputs ............................6

Meter Modules ...........................7

Current Sensors ..........................9

Sensor Orientation ........................9

Pulse Input Module .......................11

Digital Output Module .....................11

Energy Portal Module .....................12

Touch Screen Display .....................13

Communication Ports .....................14

PXMP Configuration Software ...............14

Effective July 2017

Supersedes October 2016

Information Booklet IB150001EN

Power Xpert® Multi-Point Meter

Quick Start Guide

Summary of content (16 pages)

PAGE 1
Information Booklet IB150001EN Effective July 2017 Supersedes October 2016 Power Xpert® Multi-Point Meter Quick Start Guide Contents Description Page Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . 2 Ordering Information. . . . . . . . . . . . . . . . . . . . . . . 2 Material Selection – Example . . . . . . . . . . . . . . . . 4 Meter Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 2
Information Booklet IB150001EN Effective July 2017 Power Xpert® Multi-Point Meter Quick Start Guide Product Overview Ordering Information The Eaton Power Xpert Multi-Point Meter (PXMP Meter) offers a highly modular approach to high density metering applications in electrical power distribution. The PXMP Meter is compatible with most 3-phase industrial, commercial, and single-phase residential low voltage electrical power systems.
PAGE 3
Power Xpert® Multi-Point Meter Quick Start Guide Information Booklet IB150001EN Effective July 2017 Table 1. PXMP Meter System – Modular Components. Catalog Number Description Catalog Number Description CSXXX - Current Sensors with 10 mA Max.
PAGE 4
Power Xpert® Multi-Point Meter Quick Start Guide Information Booklet IB150001EN Effective July 2017 Material Selection – Example The application below (details described in upper left section of the drawing) is to monitor various 3-phase and single-phase breakers in an Eaton IFS Switchboard (see Figure 2). The required PXMP hardware layout is shown and the required modules per slot are listed on this drawing. Individual selection steps are listed at the bottom of the page.
PAGE 5
Power Xpert® Multi-Point Meter Quick Start Guide Information Booklet IB150001EN Effective July 2017 Meter Base Meter Base Assembly Both PXMP Meter Base assembly models are shipped without modules. The front of the base has a label indicating 10 positions or slots (1-10), where modules can be mounted. Each position is covered with a metal slot cover secured to the assembly with screws. The slot covers protect the backplane of the PXMP-MB assembly.
PAGE 6
Power Xpert® Multi-Point Meter Quick Start Guide Information Booklet IB150001EN Effective July 2017 Voltage Inputs Metering voltage inputs connect to the right side of the PXMP-MB and PXMP-MB-AB assemblies. Inputs are marked A (V1), B (V2), C (V3), and N (VR) on both the PXMP-MB and PXMP-MB-AB assemblies. If connecting to a Delta system, the unused N (VR) terminal should be connected to chassis ground. A cover for the voltage terminal is provided as a barrier to hazardous terminal access.
PAGE 7
Power Xpert® Multi-Point Meter Quick Start Guide Information Booklet IB150001EN Effective July 2017 Meter Modules Each PXMP-MM has six 2 x 2 female receptacles for current sensor connections. Each 2 x 2 receptacle can be considered to be in one of six rows of connection points for the PXMP-MMxxxx that are normally installed in slots one through nine. Each horizontal row is paired with the phase voltage indicated on the phase assignment label to the left.
PAGE 8
Power Xpert® Multi-Point Meter Quick Start Guide Information Booklet IB150001EN Effective July 2017 Va Vb Vc Vn A A A A B B B B C C C C C2 B2 A2 C1 B1 A1 C2 B2 A2 C1 B1 A1 EATON www.eaton.
PAGE 9
Power Xpert® Multi-Point Meter Quick Start Guide Information Booklet IB150001EN Effective July 2017 Current Sensors Sensor Orientation Three different types of current sensors can be used with the PXMP Meter based on secondary output type and range. The PXMP Meter is compatible with direct connection to 100 mA, 10 mA, and 333 mV maximum rated secondary current sensors. All single CT applications require that the CT provides Double/Reinforced Insulation 600V, CATIII.
PAGE 10
Power Xpert® Multi-Point Meter Quick Start Guide Information Booklet IB150001EN Effective July 2017 Va Vb Vc Vn A A A A B B B B C C C C C2 B2 A2 C1 B1 A1 C2 B2 A2 C1 B1 A1 N C B A Load #4 N C B A Load #3 N C B A Load #2 N C B A Load #1 Sensor Type and Phasing must match Meter Module! 100mA Sensors to 100 mA Meter Module 10mA Sensors to 10 mA Meter Module 333mV Sensors to 333 mV Meter Module Phase A Sensors Connect to A1 or A2 Phase B Sensors to Connect B1 or B2 Phase C Sensors to Co
PAGE 11
Power Xpert® Multi-Point Meter Quick Start Guide Information Booklet IB150001EN Effective July 2017 Pulse Input Module Digital Output Module The PXMP-PIM has terminals for eight digital inputs. Eight front facing LEDs on the Pulse Input Module flash when digital inputs transition. The PXMP-DOM provides outputs from the PXMP-MB logic to external circuit groups. These outputs are used for control or to indicate alarm conditions. A typical installation might be for building automation systems.
PAGE 12
Power Xpert® Multi-Point Meter Quick Start Guide Information Booklet IB150001EN Effective July 2017 Energy Portal Module The PXMP-EPM adds sophisticated Web enabled metering capability to the PXMP Meter. A typical application would be for storing the results of metering utilities (electric, gas, water, or steam), for serving an apartment complex, tenant by tenant. Stored data for each tenant is then available over Ethernet with the support of an embedded JAVA Applet that is pre-loaded in the PXMP-EPM.
PAGE 13
Power Xpert® Multi-Point Meter Quick Start Guide Information Booklet IB150001EN Effective July 2017 Touch Screen Display The Eaton PXMP-DISP-6, is an Eaton HMIVU06CUNB1 preloaded with software for use exclusively with the PXMP-MB(-AB). A 4ft (1.22m) communication cable is used to connect the PXMP-DISP-6 COM 2 port to the PXMP-MB(-AB) RS-485 COM 2 port, enabling the PXMP-DISP-6 to be mounted up to 4ft (1.22m) away from the PXMPMB(-AB).
PAGE 14
Power Xpert® Multi-Point Meter Quick Start Guide Information Booklet IB150001EN Effective July 2017 Communication Ports PXMP Configuration Software The PXMP Meter provides two Com ports with RS485 serial interfaces supporting Slave Modbus RTU protocol. Com 1 and Com 2 provide two RS-485 serial communication ports supporting Modbus Slave RTU protocol. The PXMP Configuration Software is a JAVA application provided free of charge by Eaton to support the configuration and commissioning of the PXMP Meter.
PAGE 15
Power Xpert® Multi-Point Meter Quick Start Guide Information Booklet IB150001EN Effective July 2017 Figure 28. PXMP Configuration Software Meter Configuration Screen. Additional Information Detailed information on applications and options can be found in the Power Xpert Multi-Point Meter User Guide (IM150001EN). The guide can also be found at http://www.eaton.com/pxmp. EATON www.eaton.
PAGE 16
Information Booklet IB150001EN Effective July 2017 Power Xpert® Multi-Point Meter Quick Start Guide This Information Booklet is published solely for information purposes and should not be considered all-inclusive. If further information is required, you should consult an authorized Eaton sales representative. The sale of the product shown in this literature is subject to the terms and conditions outlined in appropriate Eaton selling policies or other contractual agreement between the parties.