Datasheet

03/22/2012 HPL-ED2011 V2.0 EN (UX111) 1 / 2
Switched�neutral
Part�no. N-P1E
Article�no. 000651
Early-make, late-break
Program
Range   Accessories
   Neutral conductor contacts
   Early-make switching-on behavior, late-break switching-off behavior
The N contact always behaves as an early-make contact when
switching on and as a late-break contact when switching off.
N-P1(P3)… switching capacity same as for contacts P1(P3)-…
For left or right side mounting
For use with   P1-…/E, …/EA, …/EZ
Approbationen
UL approval Yes
CSA approval Yes
Product Standards UL 508; CSA-C22.2 No. 14-05; IEC/EN 60947-3; CE marking
UL File No. CSA report applies to both Canada and US
UL CCN –
CSA File No. 12528
CSA Class No. 3211-05
NA Certification UL listed, CSA certified
Technical�data�according�to�ETIM�4.0
Number of auxiliary contacts as normally open contact   0
Number of auxiliary contacts as normally closed contact   0
Rated permanent current Iu  A 0
Number of poles   0
Conditioned rated short-circuit current Iq  kA 0
Degree of protection (IP), front side   -
Number of auxiliary contacts as change-over contact   0
Interlockable   No
Motor drive integrated   No
Connection type main current circuit   Screw connection
Version as emergency stop installation   No
Type of control element   -
Version as main switch   No
Version as switch disconnector compact   No
Version as safety switch   No
Version as maintenance-/service switch   No
Rated operation power at AC-23, 400V  kWh 0
Rated operation power AC-3, 400 V  kWh 0
Suitable for ground mounting   No
Suitable for front mounting   No
Suitable for front mounting center   No
Suitable for distribution board installation   No
Suitable for intermediate mounting   No
Max. rated operation voltage Ue AC  V 0
Motor drive optional   No
Voltage release optional   No
Device construction   -
Dimensions