Installation Manual
www.eaton.com IM02601001E 8-7
Introduction to Web Server Pages
Setup Page
The Setup page is the administrative interface for the meter. Use this to initially cong-
ure the meter for operation as well as to ne-tune the conguration to meet your needs.
You’ll need the administrative account name and password to modify the setup param-
eters. Details about using the setup page are covered in the Setup on the Web Pages
chapter.
Setup Page
Help Page
The Help page not only provides access to the manual, but also lets you:
• Generate a map of the Modbus registers for both the meter and installed I/O cards.
• Access a web page from which you can download the various MIB les.
• Access the Eaton rmware update page.
• Access the Eaton Power Xpert Website.
• View licensing information for all 3rd party software used by the Gateway Card.
• Generate an EPICS le for a selected BACnet/IP virtual device (meter, gateway, and
optional I/O card). You’ll be prompted to specify a location on your local le system for
the generated .TPI le.