Installation Manual
www.eaton.com IM02601001E 7-11
Using the I/O Option Cards
Network Communications with the Power Xpert® 2000 Series (-5)
The Power Xpert® Meter Gateway Card provides the PXM 2000 Series with Ethernet capability.
NOTE: Network conguration will be done through the card.
Specications
The technical specications at 25° C are as follows:
Number of ports: 1
Power consumption: <2.0 Watts internal
Data rate: 10/100Mbit
Diagnostic features: 100 Mbit LINK and for ACTIVITY. There are also four LEDs for Power,
Firmware upgrade activity, DHCP use, and meter communication status.
Number of simultaneous Modbus
connections: Ten
The general specications are as follows:
Operating temperature: (-20 to +70)
o
C
Storage temperature: (-20 to +70)
o
C
Relative air humidity: Maximum, 95% non-condensing
EMC - Immunity Interference: EN61000-4-2
Weight: 1.7 oz.
Dimensions (inches) W x H x L: 0.72 x 2.68 x 3.26
Connection type: RJ45 modular (auto-detecting transmit and receive)
Default Conguration
The PXM 2000 Series automatically recognizes the installed option card during Power Up. If you have not programmed a con-
guration for the card, the unit will default to the following:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Default Gateway: 0.0.0.0