Installation Manual
6-4 IM02601001E www.eaton.com
Using the PXM 2000 Series
Entering a Password
If Password Protection has been enabled from the web pages for Reset and/or Conguration (see Chapter 8 for
information), a screen appears requesting a Password when you try to reset the meter and/or congure settings
through the front panel.
• PASS appears in the A window and 4 dashes appear in the B window. The leftmost dash is ashing.
1. Press the Down button to scroll numbers from 0 to 9 for the ashing dash. When the correct number
appears for that dash, use the the Right button to move to the next dash.
Example: The left screen, below, shows four dashes. The right screen shows the display after the rst
two digits of the password have been entered.
2. When all 4 digits of the password have been selected, press the Enter button.
• If you are in Reset Mode and the correct Password has been entered, “rSt dMd donE” or “rSt EnEr
donE”appears and the screen resumes auto-scrolling parameters.
• If you are in Conguration Mode and the correct Password has been entered, the display returns to the
screen that required a password.
• If an incorrect Password has been entered, “PASS ---- FAIL” appears, and:
• The previous screen is redisplayed, if you are in Reset Mode.
• The previous Operating Mode screen is redisplayed, if you are in
Conguration Mode.