Installation Manual

www.eaton.com IM02601001E 6-1
Using the PXM 2000 Series
6 USING THE PXM 2000 SERIES
Introduction
You can use the Elements and Buttons on the meter’s face to view meter readings, reset and/or congure the
PXM 2000 Series, and perform related functions. The following sections explain the Elements and Buttons and
detail their use.
Understanding Meter Face Elements
The meter face features the following elements:
• Reading Type Indicator:
Indicates Type of Reading
• Parameter Designator:
Indicates Reading Displayed
• Watt-Hour Test Pulse:
Energy Pulse Output to Test Accuracy
• Scaling Factor:
Kilo or Mega multiplier of Displayed Readings
• % of Load Bar:
Graphic Display of Amps as % of the Load
Understanding Meter Face Buttons
The meter face has Menu, Enter, Down and
Right buttons, which allow you to perform the
following functions:
• View Meter Information
• Enter Display Modes
• Congure Parameters (may be Password Protected)
• Perform Resets (may be Password Protected)
• Perform LED Checks
• Change Settings
• View Parameter Values
• Scroll Parameter Values
• View Limit States
Parameter
Designator
Watt-Hour
Test Pulse
Scaling
Factor
% of Load Bar
Reading Type
Indicator
Figure 6.1: Meter’s Face Plate with Elements
Figure 6.2: Meter’s Face Plate with Buttons
Enter
Menu
Down
Right