Installation Manual

Eaton, Power Xpert, PowerChain Management, Powerware, and X-Slot are regis-

tered trademarks of Eaton Corporation or its subsidiaries and afﬁliates. Microsoft

and Windows are registered trademarks of Microsoft Corporation. Modbus is a

registered trademark of Schneider Electric.

EATON CORPORATION - CONFIDENTIAL AND PROPRIETARY NOTICE TO PER-

SONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL INFORMATION

THIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTAINED

THEREON, IS CONFIDENTIAL AND IS THE EXCLUSIVE PROPERTY OF EATON

CORPORATION, AND IS MERELY ON LOAN AND SUBJECT TO RECALL BY EATON

AT ANY TIME. BY TAKING POSSESSION OF THIS DOCUMENT, THE RECIPIENT

ACKNOWLEDGES AND AGREES THAT THIS DOCUMENT CANNOT BE USED IN

ANY MANNER ADVERSE TO THE INTERESTS OF EATON, AND THAT NO PORTION

OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE REPRODUCED WITHOUT

THE PRIOR WRITTEN CONSENT OF EATON. IN THE CASE OF CONFLICTING

CONTRACTUAL PROVISIONS, THIS NOTICE SHALL GOVERN THE STATUS OF THIS

DOCUMENT.

DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY

The information, recommendations, descriptions and safety notations in this docu-

ment are based on Eaton Electrical Inc. and/or Eaton Corporation’s (“Eaton”) experi-

ence and judgment and may not cover all contingencies. If further information is

required, an Eaton sales ofﬁce should be consulted.

Sale of the product shown in this literature is subject to the terms and conditions

outlined in appropriate Eaton selling policies or other contractual agreement be-

tween Eaton and the purchaser.

THERE ARE NO UNDERSTANDINGS, AGREEMENTS, WARRANTIES, EXPRESSED

OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PUR-

POSE OR MERCHANTABILITY, OTHER THAN THOSE SPECIFICALLY SET OUT

IN ANY EXISTING CONTRACT BETWEEN THE PARTIES. ANY SUCH CONTRACT

STATES THE ENTIRE OBLIGATION OF EATON. THE CONTENTS OF THIS DOCU-

MENT SHALL NOT BECOME PART OF OR MODIFY ANY CONTRACT BETWEEN

THE PARTIES.

In no event will Eaton be responsible to the purchaser or user in contract, in tort

(including negligence), strict liability or otherwise for any special, indirect, incidental

or consequential damage or loss whatsoever, including but not limited to damage

or loss of use of equipment, plant or power system, cost of capital, loss of power,

additional expenses in the use of existing power facilities, or claims against the

purchaser or user by its customers resulting from the use of the information, recom-

mendations and descriptions contained herein.