Installation Manual
www.eaton.com IM02601001E C-11
Conguration Management
11. The default Username is admin and the default Password is admin. Log in using these
credentials.
Login dialog
12. If you successfully logged in as admin you may now congure the card for the settings
specied by your network administrator. Refer to the previously recorded network settings.
You can also enter such optional information as the meter’s location, who to contact in case
of problems, etc.
13. When you’ve completed conguration, click the OK button.
The new IP address will take effect shortly after clicking OK. Communication with the PC will
then be lost. You can continue to congure the meter after it is connected to your LAN (see
chapter 10 of this guide).
14. Disconnect the Ethernet cable to the PC and connect the meter to the LAN.
Note: Remember to recongure the PC’s network settings for your LAN.
This concludes network conguration. You can now proceed to verify the IP address.
Verify the IP address
To check the IP address from the meter’s front panel:
1. If the meter has power the display should be showing normal data, such as voltage, current,
etc.
2. Push the menu button on the face of the meter. The main menu screen appears.
3. Push down repeatedly until IP blinks.
4. Push enter and the meter’s IP address appears, which should appear something like the
following:
010.2
22.05
1.066
In this example the IP address is 010.222.051.066. This should match the address the
network administrator provided for this meter.
5. Push menu to return to the main menu.
Network Access
Once the network IP address is known, most meter functions and conguration can be done via
the network. Use a networked client PC running version 6 or greater of the JAVA J2SE JRE and a
web browser such as Internet Explorer version 7 or 8 to navigate to the meter’s IP address.
Restarting The Gateway Card
You can restart the Gateway Card through a momentary push-button switches accessed through
two small holes in the face plate of the Gateway Card. Although this is not used in normal opera-
tions, this switch allows you to restart the Gateway Card in the meter.