Installation Manual

C-8 IM02601001E www.eaton.com
Conguration Management
Settings Button
3. Ensure the Keep Temporary Files on My Computer check box is cleared.
Keep Temporary Files on My Computer check box
4. Connect the PC to the Gateway Card through the seven-foot Ethernet cable shipped with the
meter.
There are two green lights (LEDs) located on the Gateway Card’s Ethernet port. If the Ether-
net cable is connected to an active Ethernet port on the PC both lights should be illuminated
(the light labeled Act may be ickering reecting network activity).
5. The card’s default Ethernet IP address is 192.168.1.1. Set the PC’s address to an address
on the same subnet, such as 192.168.1.100. To do this, use the following steps:
a. Click Window’s Start.
b. Choose either Settings > Control Panel (Windows 2000) or Control Panel (Windows
XP).