Installation Manual

www.eaton.com IM02601001E C-5
Conguration Management
DIP Switches on the Gateway Card
1 2 3 4 5 6 7 8
ON
DIP switch
DIP switch, showing
switches 1, 3 and 6.
Gateway Card, removed from the meter.
4. Move the appropriate switch to the ON position:
S1 Position Number OFF Position (Default) ON Position
1 Enable previously stored net-
work conguration settings.
Override network settings to
assign a private IP address
(Configuration mode); the port
is set to 192.254.1.1.
2 Reserved Reserved
3 Normal Behavior Reset the HTTP passwords to
the defaults on boot (user and
admin).
After a successful boot, the
switch should be turned back
off before rebooting the card.
4 Reserved Reserved
5 Reserved Reserved
6 Normal Behavior Reset the card to factory
defaults on boot (after a suc-
cessful boot, the switch should
be turned back off before
rebooting the card again).