Installation Manual

www.eaton.com IM02601001E 11-3
Securing the Power Xpert Meter
2. Click the Setup tab.
3. Navigate to the Meter Setup > Security > Passwords page.
4. Click the Edit Password button for each of the Network users and change the default
values. If you didn’t log in earlier, you must enter the admin account user name and
password.
5. You must enter the new password twice and both entries must match to change the
new password.
6. Click OK.
7. Click the Edit Numeric Password button and change the default four digit numeric
password.
8. You must enter the new four-digit password twice and both entries much match to
change the password.
9. Click OK.
User Setup Page for Changing Passwords
Recommended Meter Access Control Settings
The following are “best practice” recommendations for Power Xpert Meter security set-
tings. You should adopt these to harden the security of the meter.
To access the PXM 2000 Series security settings:
1. Access the meter home page. You may be challenged for the admin account user
name and password.
2. Click the Setup tab.
3. Navigate to the Meter Setup > Security > Access Control page.
4. Click the Edit button.