Installation Manual
10-24 IM02601001E www.eaton.com
Setup on the Web Server Pages
4. Fill out the form (if required).
5. Download the rmware to your local le system.
6. Click the Browse button.
7. Select the rmware le.
8. Click the Open button.
Note: On rare instances (such as a problem occurring in the rmware upgrade) you may
need to reload the meter page after rebooting the meter. It can take around ve minutes
for values to display after a reboot.
Diagnostics
You can access the system log or a page that displays the names, serial numbers, and
versions of the various components in the meter.
Diagnostics - System Log
The system log shows system events, such as changes to settings, rmware updates,
and meter restarts. Each event carries a time-and-date stamp and a severity level. You
can print the log by clicking the Print button; however, the printout contains a screen im-
age, not the entire log. To print an entire log you may need to use the scroll bar to reposi-
tion the log in the window and print it in sections.
Note: You can tell who has made conguration changes to the meter from the log as it
not only logs changes but the IP address of the computer from which the changes were
made.
System Log Page
Diagnostics - System Hardware
The System Hardware page provides a single, convenient page you can use to check
information about the meter and the cards installed in it.