Installation Manual
www.eaton.com IM02601001E 10-13
Setup on the Web Server Pages
After setting the Routed network number, the meter will provide a setup page in which
you can set the following:
Identication: These elds provide the unique identiers for the gateway card itself.
They include:
• Base ID for Auto-assign: You can set a base ID number, and the meter will use this
number to automatically generate the object-identier for the network card, the meter
itself, and the option card. To enable the Base ID method, select the Auto-assign
network card ID check box.
• Device ID (object-identier): This is a the address of the device on the network. You
can manually set the number in a range of 1 to 4194302; however, Auto-assign net-
work card ID must not be selected in order to edit this eld.
• Device object-name: This is an automatically generated string, designed to be
unique (it must be unique within your network). You can modify the string if required.
• BACnet/IP Mac address: This is not user-settable, and is provided as reference only.
BBMD
If you’re using a BBMD to connect your meter to another subnet in your BACnet/IP
network, you must also dene the BBMD IP address (including port) to register with the
BBMD on the remote subnet. You can also set the BBMD time to live value. The default
for the time to live is 360 s, and you can set any value (in seconds) from 30 to 65534.
Virtual Routing
In addition to the Routed network number, you must designate if the virtual device
IDs (object-identiers) for the meter and the option card will be automatically assigned.
Finally, you can set an IP address to be used as a template in generating the separate
BACnet/IP Mac addresses for the meter and option card.
Routed Device Settings
Depending on the settings under Virtual Routing, you can use these elds to either
specify the Device ID (object-identier) or allow the meter to automatically select this.
You can also specify the Device object-name for each of the virtual devices. If an option
card is installed, you can select its virtual device through the drop down list.