Datasheet

Electrical Group Eaton Industries Pty Ltd

ABN 66 103 014 571

10 Kent Road

Mascot, NSW Australia 2020

www.eaton.com/powerquality

1300 UPS UPS (1300 877 877)

ER61042 Castor Kit

Features

 Load rate up to 275 kg per castor

 Mounts direct to bottom frame

 360 degree swivel

 RoHS compliant

 Conforms to ASTM D160-01 and ASTM B117 (500 hours salt spray test)

Material / Finish

 High grade cold rolled steel 3.0mm thickness

 Powder coat finish preceded by 5 stage iron phosphate pre-treatment

 Standard colour is low gloss black.

Part List

Part Number

Part Description

ERA003

E61042 Castor Kit

Description

Qty

1. Castor Plate

2. Wheels

3. Caged Nut

4. T-30 screw M6x12

5. Flat Washer

6. Spring Washer

PAGE 1
Electrical Group Eaton Industries Pty Ltd ABN 66 103 014 571 10 Kent Road Mascot, NSW Australia 2020 www.eaton.com/powerquality 1300 UPS UPS (1300 877 877) ER61042 Castor Kit Features  Load rate up to 275 kg per castor  Mounts direct to bottom frame  360 degree swivel  RoHS compliant  Conforms to ASTM D160-01 and ASTM B117 (500 hours salt spray test) Material / Finish  High grade cold rolled steel 3.
PAGE 2
Dimensions (in mm.) Installation 1. Remove all side panel, front and rear door from the rack. 2. Lay down the rack on the floor. 3. Install four castors at the four corner of the rack. 4. Fix castor to frame bottom with Hex screw M6 two pieces on each castor. 5. Tighten with torque 75-90 inch lbs.