User Manual

Loading and saving programs
307
08/04 AWB2528-1423GB
You can transfer a circuit diagram from easyto the card and
from the card to the easy memory or delete the content of
the card.
X After transmission, remove the memory card and close the
cover.
Saving a circuit diagram on the card
X Select DEVICE-> CARD.
X Confirm the prompt with OK to delete the contents of the
memory card and replace it with the easy circuit diagram.
Press ESC to cancel.
Loading a circuit diagram from the card
X Select the CARD-> DEVICE menu option.
X Press OK to confirm the prompt if you want to delete the
easymemory and replace it with the card content.
Press ESC to cancel.
If there are transmission problems, easy will display the
INVALID PROG message.
This either means that the memory card is empty or that the
circuit diagram on the card contains function relays that easy
does not recognise.
The “analog comparator” function relay is only used with
easy DC 24 V DC versions.
DEVICE-CARD
CARD-DEVICE
DELETE CARD
h
If the operating voltage fails during communication with
the card, repeat the last procedure since easymay not have
transferred or deleted all the data.
REPLACE ?
DEVICE-CARD
CARD-DEVICE
DELETE CARD
INVALID PROG
h
If the memory card is password-protected, the password
will also be transferred to the easy memory and will be
active immediately.