Cut Sheet

V8-T6-26 Volume 8—Sensing Solutions CA08100010E—November 2012 www.eaton.com
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6.3
Conveyor Sensor Systems
Sensor Power Supply—NEMA 4 Universal Voltage
Product Selection
Sensor Power Supply—NEMA 4 Universal Voltage
Technical Data and Specifications
Sensor Power Supply—NEMA 4 Universal Voltage
Notes
1
Total output power of supply is 100W. Total supply output power (100W) = main output power + slug output power.
2
On model PS256B-05B1, a single 12 mm DC key micro-connector is mounted to the outside of the enclosure and pre-wired to the
internal connector (see above).
3
On model PS256B-02B1, DC fail indication and slug input terminals are not active.
Operating
Voltage Output Slug Input Type Slug Output Catalog Number
100–250 Vac 27 Vdc, 100W; short circuit,
overload and overvoltage
protection (cycle power to
reset)
15–132 Vac/dc
3 mA minimum
Standard
For use with 200 series and E68
systems
Sinking or sourcing, switch
selectable; 80 mA maximum; short
circuit protection for loads less than
32 Vac or Vdc (auto reset)
PS256B-01B1
High current slug
For use with solenoid valve systems
requiring full current slug signals
4-pin DC M12 output connector
Sinking only; 100W output; short
circuit, overload and overvoltage
protection (cycle power to reset)
1
PS256B-05B1
Description PS256B-01B1 PS256B-05B1
Input power 115W, maximum inrush 30A from cold start 115W, maximum inrush 30A from cold start
Input voltage 100–250 Vac 100–250 Vac
Input current (full load) 115 Vac: 2A; 230 Vac: 4A 115 Vac: 2A; 230 Vac: 4A
Output power 100W 100W
Output voltage 27 Vdc 27 Vdc
Output protection Short circuit, overload and overvoltage
protection (auto-reset)
Short circuit, overload and overvoltage
protection (auto-reset)
Regulation ±3% ±3%
Slug input 15–132 Vac/dc 15–132 Vac/dc
Slug output Sinking or sourcing, switch selectable; 80 mA
maximum; short circuit protection for loads less
than 32 Vac or Vdc (auto reset)
Sinking only; 100W output; short circuit, overload
and overvoltage protection (cycle power to reset)
1
Indicators Red LED: AC in; green LED: DC out Red LED: AC in; green LED: DC out
DC power monitor output NO contact, solid-state relay, 80 mA maximum NO contact, solid-state relay, 80 mA maximum
Temperature range –13° to 131°F (–25° to 55°C) –13° to 131°F (–25° to 55°C)
Vibration IEC 68-2-6 Test FC 10g IEC 68-2-6 Test FC 10g
Enclosure material Aluminum Aluminum
Enclosure rating NEMA 4X NEMA 4X
Connections
DC Main output/slug output:
One 6-position plug-in style connector
2
Main output/slug output:
One 6-position plug-in style connector
2
AC AC line input, DC fail indication and slug input:
One 7-position plug-in style connector
3
AC line input, DC fail indication and slug input:
One 7-position plug-in style connector
3
NEMA 4
Universal Voltage