Cut Sheet

V8-T5-64 Volume 8—Sensing Solutions CA08100010E—July 2015 www.eaton.com
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5.5
Photoelectric Sensors
Comet Series Sensors
Comet Series Sensors
Notes
1
Sensor will turn off immediately when short or overload is detected (indicator LED flashes). Turn power OFF and back ON to reset.
IMPORTANT: During installation, correct power connections must be made first to ensure fail-safe short circuit protection of outputs.
2
Sensor will turn off immediately when short or overload is detected (indicator LED flashes). Sensor will reset when short is removed.
3
These products conform to NEMA tests as indicated, however, some severe washdown applications can exceed these NEMA test specifications.
4
NEMA 6P models available—contact factory.
Three-Wire and Four-Wire Sensors
Description
AC/DC Models
(AC Operation)
AC/DC Models
(DC Operation) DC-Only Models
Two-Wire Sensors
AC Models DC Models
Input voltage 20 to 264 Vac, 50/60 Hz 15 to 30 Vdc
(15 to 24 Vdc above
131°F/55°C)
10 to 30 Vdc,
(10 to 24 Vdc above
131°F/55°C)
90 to 132 Vac, 50/60 Hz 18 to 50 Vdc
Power dissipation 1.5W maximum 1.5W maximum 1W maximum 2W maximum 2W maximum
Output type VMOS (bi-directional) NPN (sink) NPN and PNP (dual outputs) DMOS DMOS
Current switching 300 mA maximum 300 mA maximum PNP: 100 mA maximum;
NPN: 250 mA maximum
(NPN: 120 mA maximum above
131°F/55°C)
300 mA 300 mA
Voltage switching 375V peak maximum 375V peak maximum 30 Vdc maximum 132 Vac maximum 50 Vdc maximum
Off-state leakage 250 μA typical;
500 μA maximum
250 μA typical;
500 μA maximum
10 μA maximum 1.7 mA maximum 1.5 mA maximum
Surge current 2A maximum 2A maximum 1A maximum 1A maximum 1A maximum
On-state voltage drop — 1.8V at 10 mA; 3.5V at 300 mA NPN: 400 mV at 10 mA,
1.5V at 250 mA;
PNP: 2.4V at 100 mA
10 Vac 8 Vdc
Response time 10 ms 10 ms 1 ms; 3.5 ms (thru-beam) 32 ms 32 ms
Time delay Models with fixed time delay
available—contact factory
Models with fixed time delay
available—contact factory
Models with fixed time delay
available—contact factory
Models with fixed time delay
available—contact factory
Models with fixed time delay
available—contact factory
Short circuit protection
112
Auto reset Auto reset
Temperature range
Thru-beam source –4° to 158°F (–20° to 70°C) –4° to 158°F (–20° to 70°C) –4° to 158°F (–20° to 70°C) –13° to 131°F (–25° to 55°C) –13° to 131°F (–25° to 55°C)
All others –40° to 158°F (–40° to 70°C) –40° to 158°F (–40° to 70°C) –40° to 158°F (–40° to 70°C) — —
Light/dark operation Switch selectable Switch selectable Switch selectable Switch selectable Switch selectable
Description All Models
Enclosure material Lens: polycarbonate; cable jacket: PVC; body: structural polyurethane foam (do not expose to concentrated acids, alcohols or ketones)
Cable/connector Cable versions: 6 ft cable (22 AWG)
Connector versions: Male mini- and micro-connectors (refer to wiring diagrams for number of pins per model) on nominal 8 in pigtails
Vibration and shock Vibration: 30g over 10 Hz to 2 kHz; shock: 100g for 3 ms 1/2 sine wave pulse
Indicator LED Lights steady when output is ON; flashes when short circuit protection is in latch condition (except two-wire models)
Sunlight immunity Perfect Prox: 5000 ft-candles; all others: 10,000 ft-candles
Enclosure ratings NEMA 1, 2, 3, 4, 4X, 6, 12 and 13
34
; IP69K