Cut Sheet

Volume 8—Sensing Solutions CA08100010E—July 2015 www.eaton.com V8-T5-39
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5.3
Photoelectric Sensors
IntelliView Series Sensors
Technical Data and Specifications
Foreground/Background Suppression Models Distance Sensing Models—Long Range
Description Specification
Input voltage 10–30 Vdc
Ripple 2 Vpp max.
Outputs PNP, NO or NC; 30 Vdc max.
Output current 100 mA max. (short-circuit protected)
Output saturation voltage < 2V max.
Response time 1 ms
Switching frequency 500 Hz
Indicator LEDs For E75-PPA: Output LED (red), stability LED (green)
For E75-PP1: Output LED (yellow), stability LED (green)
Gain adjustment For E75-PPA: Adjustment screw (except for E75-PPA010P)
For E75-PP1: Six-turn adjustment pot with numerical indicator
Operating temperature –25° to 55°C (–13° to 131°F)
Storage temperature –25° to 70°C (–13° to 158°F)
Electrical protection Class 2
Sensing distance Varies by model, see model selection table on Page V8-T5-37
Beam type All models except E75-PPA010P-M12: Infrared LED 880 nm
E75-PPA010P-M12: Red LED
Vibration Amplitude: 0.5 mm
Frequency: 10–55 Hz for every axis (EN60068-2-6)
Shock resistance Half sine, 30 g
n
, 11 ms, 3 axes
Housing material ABS
Lens material PMMA
Enclosure ratings For E75-PPA_: IP65
For E75-PP1_: IP67
Connections M12 4-pin micro-connector
Weight 40g max.
Description
For E75-DST4_ (Long-Range Distance Sensor)
Specification
Input voltage 16–28 Vdc
Ripple 2 Vpp max.
Current consumption
(Output current excluded)
120 mA max.
Outputs Analog, 0–10V
2 PNP outputs
30 Vdc max.
Output switching mode Light operate (output on when target present)
Output current 100 mA max. (short-circuit protected)
Output saturation voltage < 2V max.
Response time 12 ms
Switching frequency 42 Hz
Indicator LEDs 2 output LEDs (yellow)
Power/alarm LED (green)
Distance adjustment Dual buttons
Warm-up 15 min
Operating temperature 0° to 50°C (32° to 122°F)
Storage temperature –20° to 70°C (–4° to 158°F)
Measurement range 0.3–4.0m (1.0–13.1 ft)
Linearity < 1% (24 Vdc, 25°C, with 90% white target)
Repeatability ± 4 mm
Hysteresis 20 mm
Temperature drift < 1 mm per °C
Beam type Red laser (665 nm),
Class 2 EN 60825-1 (1994) A1 (2002) A2 (2001)
Vibration Amplitude: 0.5 mm
Frequency: 10–55 Hz for every axis (EN60068-2-6)
Shock resistance Half sine, 30 g
n
, 11 ms, 3 axes
Material of construction ABS
Lens material PMMA
Enclosure ratings IP67
Connections M12 5-pin micro-connector
Weight 92g max.