Specification

ManualsBrandsEaton ManualsDimmers1000-Watt Slide Dimmer Single-Pole 3-Way Decorator Switch with Preset, Almond Finish

CORE Lighting Controls

PART 1 – GENERAL

1.01 SUMMARY

A. Scope: Includes DEVINE dimmers, fan speed control and related devices as specified herein for the areas indicated

on the drawings, specifications, and load schedules.

B. Related Sections: Section 16570 (Dimming Controls).

1.02 REFERENCES

A. UL 1472 and UL 1972

B. NOM

C. ANSI

1.03 SYSTEM DESCRIPTION AND OPERATION

A. Permanently installed, wallbox mounted dimmers

B. Permanently installed, wallbox mounted fan-speed controls

C. Screwless wallplates

1.04 SUBMITTALS

A. Submit manufacturer's standard catalog data giving all product, application, wiring, and installation information on all

basic components and wallplate kits. Provide test data and/or samples as required to demonstrate conformance with

PART TWO of this specification.

1.05 QUALITY ASSURANCE

A. Manufacturer shall have a minimum of 15 years continuous experience in manufacturing wallbox dimming products.

B. Dimmers and Fan-speed controls shall be cULus listed and NOM approved specifically for each required load (i.e.,

tungsten, halogen, incandescent, electronic low voltage transformer, magnetic low voltage transformer, and

fluorescent). Manufacturer shall provide file card or certificate upon request. Universal load-type dimmers shall not be

acceptable.

C. To assure compatibility, all dimming controls shall be obtained from a single source with complete responsibility

over all lighting controls, including accessory products.

1.06 WARRANTY

A. All devices shall be covered by a minimum two-year warranty.

PART 2 – PRODUCTS

2.01 ACCEPTABLE MANUFACTURERS

A. Cooper Wiring Devices

B. Unless otherwise noted, all basic components (dimmer & fan-speed control) shall be provided by one manufacturer.

2.02 EQUIPMENT

A. DEVINE Lighting Controls

1. Performance

a. Dimmers shall provide full-range, continuously variable control of light intensity.

b. Wall controls shall fit a decorator wallplate opening with a paddle switch.

c. Controls shall have a gloss finish.

d. Controls shall provide single-pole and 3-way control.

Project Name:

Prepared By:

Project Number:

Date:

DEVINE Specification

Submittal

Catalog Number:

Type:

Summary of content (3 pages)

PAGE 1
CORE Lighting Controls DEVINE Specification Submittal Project Name: Prepared By: Project Number: Date: Catalog Number: Type: PART 1 – GENERAL 1.01 SUMMARY A. Scope: Includes DEVINE dimmers, fan speed control and related devices as specified herein for the areas indicated on the drawings, specifications, and load schedules. B. Related Sections: Section 16570 (Dimming Controls). 1.02 REFERENCES A. UL 1472 and UL 1972 B. NOM C. ANSI 1.03 SYSTEM DESCRIPTION AND OPERATION A.
PAGE 2
CORE Lighting Controls e. When ON, the slider shall change the light level/fan speed. When OFF, the slider shall set the preset the light level/fan speed that the control will turn ON to. f. Paddle switch shall turn lights/fan ON to the preselected level, or OFF. g. Paddle switch and slider shall be captured internal to the control. h. 3-Way controls shall be capable of multi-location ON and mechanical air-gap OFF using standard 3-way and 4-way switches.
PAGE 3
CORE Lighting Controls 5. DEVINE Fan-Speed Controls: a. Fan-speed controls shall be cULus Listed and NOM approved, DEVINE style. b. Quiet fan-speed model (DFS15P) shall provide three speed settings with paddle providing preset on and off. c. Quiet fan-speed control shall provide single-pole/3-way control of one paddle fan (1.5A max.). B. DEVINE Accessories 1. Switch Components a. Switches shall provide on/off control of any 120/277 VAC load up to 15A or 20A. b.