Datasheet

ManualsBrandsEaton ManualsAutomationVariable Speed Starter

DATASHEET - DE11-345D0FN-N20N

Variable speed starters, Rated operational voltage 400 V AC, 3-phase, Ie 5

A, 2.2 kW, 3 HP, Radio interference suppression ﬁlter

Part no. DE11-345D0FN-N20N

Catalog No. 180665

Eaton Catalog No. DE11-345D0FN-N20N



Delivery program

Product range   Variable speed starter

Part group reference (e.g. DIL)   DE11

Rated operational voltage U

 400 V AC, 3-phase

480 V AC, 3-phase

Output voltage with V

 400 V AC, 3-phase

480 V AC, 3-phase

Mains voltage (50/60Hz) U

V 380 (-10%) - 480 (+10%)

Rated operational current

  

At 150% overload I

A 5

Note   Rated operational current at an operating frequency of 16 kHz and an ambient air

temperature of +50°C

Assigned motor rating

  

Note   for normal internally and externally ventilated 4 pole, three-phase asynchronous

motors with 1500 rpm

-1

at 50 Hz or 1800 min

-1

at 60 Hz

Note   Overload cycle for 60 s every 600 s

Note   at 400 V, 50 Hz

150 % Overload P kW 2.2

150 % Overload I

A 5

Note   at 440 - 480 V, 60 Hz

150 % Overload P HP 3

150 % Overload I

A 4.8

Degree of Protection   IP20/NEMA 0

Interface/ﬁeld bus (built-in)  

OP-Bus (RS485)/Modbus RTU, CANopen

Fitted with   Radio interference suppression ﬁlter

Frame size   FS2

Connection to SmartWire-DT   yes

in conjunction with DX-NET-SWD3 SmartWire DT module

Technical data

General

Standards   Speciﬁcation for general requirements: IEC/EN 61800-2

EMC requirements: IEC/EN 61800-3

Safety requirements: IEC/EN 61800-5-1

Certiﬁcations   CE, UL, cUL, RCM

Production quality   RoHS, ISO 9001

Climatic prooﬁng ρ

% < 95%, average relative humidity (RH), non-condensing, non-corrosive

Ambient temperature   

operation (150 % overload) ϑ °C -10 - +60

Storage ϑ °C -40 - +70

Radio interference level   

Radio interference class (EMC)   C2, C3, depending on the motor cable length, the connected load, and ambient

conditions. External radio interference suppression ﬁlters (optional) may be

necessary.

Environment (EMC)   1st and 2nd environments as per EN 61800-3

maximum motor cable length I m C2 ≤ 10 m

C3 ≤ 25 m

Mechanical shock resistance  g 15 (11 m/s, EN 60068-2-27)

12/21/2018 Eaton 180665 ED2018 V51.0 EN 1 / 6

Summary of content (6 pages)

PAGE 1
DATASHEET - DE11-345D0FN-N20N Variable speed starters, Rated operational voltage 400 V AC, 3-phase, Ie 5 A, 2.2 kW, 3 HP, Radio interference suppression ﬁlter Part no. Catalog No. Eaton Catalog No. DE11-345D0FN-N20N 180665 DE11-345D0FN-N20N Delivery program Product range Variable speed starter Part group reference (e.g.
PAGE 2
Vibration EN 61800-5-1 Altitude m 0 - 1000 m above sea level Above 1000 m: 1% derating for every 100 m max.
PAGE 3
UL (Class CC or J) A 15 Mains contactor 150 % overload (CT/IH, at 50 °C) DILEM-… 110 % overload (VT/IL, at 40 °C) DILM7-… Main choke 150 % overload (CT/IH, at 50 °C) DX-LN3-010 Motor feeder motor choke 150 % overload (CT/IH, at 50 °C) DX-LM3-005 Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 5 Heat dissipation per pole, current-dependent Pvid W 0 Equipment heat dissipation, current-dependent Pvid
PAGE 4
Number of phases output 3 Max. output frequency Hz 300 Max. output voltage V 500 Nominal output current I2N A 5 Max. output at quadratic load at rated output voltage kW 0.5 Max. output at linear load at rated output voltage kW 0.
PAGE 5
Width mm 90 Depth mm 168 Approvals Product Standards UL 508C; CSA-C22.2 No. 14; IEC/EN61800-3; IEC/EN61800-5; CE marking UL File No. E172143 UL Category Control No. NMMS, NMMS7 CSA File No. UL report applies to both US and Canada North America Certiﬁcation UL listed, certiﬁed by UL for use in Canada Specially designed for North America No Suitable for Branch circuits Max.