Data Sheet

Ambient temperature   
Operating ambient temperature min.  °C -10
Operating ambient temperature max.  °C + 50
   operation (with 150 % overload)
Storage ϑ °C -40 - +60
Radio interference level   
Radio interference class (EMC)   C1 (for conducted emissions only), C2, C3, depending on the motor cable length, the
connected load, and ambient conditions. External radio interference suppression
filters (optional) may be necessary.
Environment (EMC)   1st and 2nd environments as per EN 61800-3
maximum motor cable length I m C1 ≤ 1 m
C2 ≤ 5 m
C3 ≤ 25 m
Mounting position   Vertical
Altitude  m 0 - 1000 m above sea level
Above 1000 m: 1% derating for every 100 m
max. 4000 m
Degree of Protection   IP20/NEMA0
Protection against direct contact   BGV A3 (VBG4, finger- and back-of-hand proof)
Main circuit
Supply   
Rated operational voltage U
e
 230 V AC, 1-phase
240 V AC, single-phase
Mains voltage (50/60Hz) U
LN
V 200 (-10%) - 240 (+10%)
Input current (150% overload) I
LN
A 8.6
System configuration   AC supply systems with earthed center point
Supply frequency f
LN
Hz 50/60
Frequency range f
LN
Hz 48 - 62
Mains switch-on frequency   Maximum of one time every 30 seconds
Power section   
Function   Variable frequency drive with internal DC link and IGBT inverter
Overload current (150% overload) I
L
A 6.45
max. starting current (High Overload) I
H
% 200
Note about max. starting current   for 4 seconds every 40 seconds
Output voltage with V
e
U
2
 230 V AC, 3-phase
240 V AC, 3-phase
Output Frequency f
2
Hz 0 - 50/60 (max. 500)
Switching frequency f
PWM
kHz 16
adjustable 4 - 32 (audible)
Operation Mode   U/f control
Speed control with slip compensation
sensorless vector control (SLV)
optional: Vector control with feedback (CLV)
Frequency resolution (setpoint value) Δf Hz 0.1
Rated operational current   
At 150% overload I
e
A 4.3
Note   Rated operational current at an operating frequency of 16 kHz and an ambient air
temperature of +50°C
Power loss   
Heat dissipation at rated operational current I
e
=150 % P
V
W 45.75
Efficiency η % 93.9
Heat dissipation at current/speed [%]   
Current = 100%   
Speed = 0 % P
V
W 42
Speed = 50 % P
V
W 53
Speed = 90 % P
V
W 64
Current = 50 %   
Speed = 0 % P
V
W 38
Speed = 50 % P
V
W 38
Speed = 90 % P
V
W 42
06/18/2021 Eaton 169078 ED2021 V80.0 EN 2 / 6