Data Sheet

ManualsBrandsEATON ManualsDrive EngineeringFrequency inverter 0.75 kW 1-phase 230 V

DATASHEET - DA1-124D3FB-A20C

Variable frequency drive, 230 V AC, 1-phase, 4.3 A, 0.75 kW, IP20/NEMA 0,

Radio interference suppression ﬁlter, 7-digital display assembly

Part no. DA1-124D3FB-A20C

Catalog No. 169078

Alternate Catalog

No.

DA1-124D3FB-A20C

EL-Nummer

(Norway)

4137153

Delivery program

Product range   Variable frequency drives

Part group reference (e.g. DIL)   DA1

Rated operational voltage U

 230 V AC, 1-phase

240 V AC, single-phase

Output voltage with V

 230 V AC, 3-phase

240 V AC, 3-phase

Mains voltage (50/60Hz) U

V 200 (-10%) - 240 (+10%)

Rated operational current

  

At 150% overload I

A 4.3

Note   Rated operational current at an operating frequency of 16 kHz and an ambient air

temperature of +50°C

Assigned motor rating

  

Note   for normal internally and externally ventilated 4 pole, three-phase asynchronous

motors with 1500 rpm

-1

at 50 Hz or 1800 min

-1

at 60 Hz

Note   Overload cycle for 60 s every 600 s

Note   at 230 V, 50 Hz

150 % Overload P kW 0.75

150 % Overload I

A 3.2

Note   at 220 - 240 V, 60 Hz

150 % Overload P HP 1

150 % Overload I

A 4.2

Degree of Protection   IP20/NEMA0

Interface/ﬁeld bus (built-in)  

OP-Bus (RS485)/Modbus RTU, CANopen

Fieldbus connection (optional)   Ethernet IP

DeviceNet

PROFIBUS

PROFINET

Modbus-TCP

EtherCAT

SmartWire-DT

Fitted with   Radio interference suppression ﬁlter

Brake chopper

Additional PCB protection

7-digital display assembly

Parameterization   Keypad

Fieldbus

drivesConnect

drivesConnect mobile (App)

Frame size   FS2

Connection to SmartWire-DT   yes

in conjunction with DX-NET-SWD1 SmartWire DT module

Technical data

General

Standards   Speciﬁcation for general requirements: IEC/EN 61800-2

EMC requirements: IEC/EN 61800-3

Safety requirements: IEC/EN 61800-5-1

Certiﬁcations   CE, UL, cUL, RCM, UkrSEPRO, EAC

Production quality   RoHS, ISO 9001

Climatic prooﬁng ρ

% < 95%, average relative humidity (RH), non-condensing, non-corrosive

Air quality   3C2, 3S2

06/18/2021 Eaton 169078 ED2021 V80.0 EN 1 / 6

Summary of content (6 pages)

PAGE 1
DATASHEET - DA1-124D3FB-A20C Variable frequency drive, 230 V AC, 1-phase, 4.3 A, 0.75 kW, IP20/NEMA 0, Radio interference suppression ﬁlter, 7-digital display assembly Delivery program Part no. Catalog No. Alternate Catalog No. EL-Nummer (Norway) DA1-124D3FB-A20C 169078 DA1-124D3FB-A20C 4137153 Product range Variable frequency drives Part group reference (e.g.
PAGE 2
Ambient temperature Operating ambient temperature min. °C -10 Operating ambient temperature max. °C + 50 operation (with 150 % overload) Storage ϑ °C -40 - +60 Radio interference level Radio interference class (EMC) C1 (for conducted emissions only), C2, C3, depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression ﬁlters (optional) may be necessary.
PAGE 3
Current = 50 % Speed = 0 % PV W 34 Speed = 50 % PV W 35 IPE mA 2.
PAGE 4
Notes concerning braking resistances: The brake resistors are assigned based on the maximum rated power of the variable frequency drive. Additional brake resistors and designs (e.g. diﬀerent duty cycles) are available upon request.
PAGE 5
Max. output frequency Hz 500 Max. output voltage V 250 Nominal output current I2N A 4.3 Max. output at quadratic load at rated output voltage kW 0.75 Max. output at linear load at rated output voltage kW 0.
PAGE 6
Depth Approvals mm 186 Product Standards UL 508C; CSA-C22.2 No. 14; IEC/EN61800-3; IEC/EN61800-5; CE marking UL File No. E172143 UL Category Control No. NMMS, NMMS7 CSA File No. UL report applies to both US and Canada North America Certiﬁcation UL listed, certiﬁed by UL for use in Canada Specially designed for North America No Suitable for Branch circuits Max.