Data Sheet

ManualsBrandsEaton ManualsAutomationDILEEM-01-G(24VDC) Electrical contactor 3 makers 3 kW 1 pc(s)

DATASHEET - DILEEM-01-G(24VDC)

Contactor, 24 V DC, 3 pole, 380 V 400 V, 3 kW, Contacts N/C = Normally

closed= 1 NC, Screw terminals, DC operation

Part no. DILEEM-01-G(24VDC)

Catalog No. 051650

Alternate Catalog

No.

XTMC6A01TD

EL-Nummer

(Norway)

4110180

Delivery program

Product range   Contactors

Application   Mini Contactors for Motors and Resistive Loads

Subrange   Contactors DILEEM

Utilization category   AC-1: Non-inductive or slightly inductive loads, resistance furnaces

AC-3/AC-3e: Normal AC induction motors: Starting, switching oﬀ while running

AC-4: Normal AC induction motors: starting, plugging, reversing, inching

  

Notes   Also suitable for motors with eﬃciency class IE3.

Also tested according to AC-3e.

Connection technique   Screw terminals

Description   With auxiliary contact

Number of poles   3 pole

Rated operational current

  

AC-3   

380 V 400 V I

A 6.6

AC-1   

Conventional free air thermal current, 3 pole, 50 - 60 Hz   

Open   

at 40 °C I

A 22

Max. rating for three-phase motors, 50 - 60 Hz

  

AC-3   

220 V 230 V P kW 1.5

380 V 400 V P kW 3

660 V 690 V P kW 3

AC-4   

220 V 230 V P kW 1.1

380 V 400 V P kW 2.2

660 V 690 V P kW 2.2

Contacts

  

N/C = Normally closed   1 NC

Contact sequence  

Instructions   Integrated diode-resistor combination

For use with   …DILE

Actuating voltage   24 V DC

Voltage AC/DC   DC operation

Technical data

General

Standards   IEC/EN 60947, VDE 0660, CSA, UL

Lifespan, mechanical Operations

x 10

Maximum operating frequency   

06/16/2021 Eaton 051650 ED2021 V80.0 EN 1 / 10

Summary of content (10 pages)

PAGE 1
DATASHEET - DILEEM-01-G(24VDC) Contactor, 24 V DC, 3 pole, 380 V 400 V, 3 kW, Contacts N/C = Normally closed= 1 NC, Screw terminals, DC operation Delivery program Part no. Catalog No. Alternate Catalog No.
PAGE 2
Mechanical electrical (Contactors without overload relay) Ops./h Operations/h 9000 Page 05/070 Climatic prooﬁng Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Open °C -25 - +50 Enclosed °C - 25 - 40 Storage °C Min. ambient temperature, storage °C - 40 Ambient temperature, storage max.
PAGE 3
Breaking capacity 220 V 230 V A 90 380 V 400 V A 90 500 V A 64 660 V 690 V A 42 Short-circuit protection maximum fuse AC Type ”2”, 500 V gL/gG A 10 Type ”1”, 500 V gL/gG A 20 at 40 °C Ith =Ie A 22 at 50 °C Ith =Ie A 20 at 55 °C Ith =Ie A 19 Ith A 16 AC-1 Rated operational current Conventional free air thermal current, 3 pole, 50 - 60 Hz Open enclosed Notes At maximum permissible ambient air temperature.
PAGE 4
DC 220 V 230 V P kW 1.1 240 V P kW 1.3 380 V 400 V P kW 2.2 415 V P kW 2.3 440 V P kW 2.4 500 V P kW 2.2 660 V 690 V P kW 2.2 12 V Ie A 20 24 V Ie A 20 60 V Ie A 20 110 V Ie A 20 220 V Ie A 20 Rated operational current open DC-1 Magnet systems Voltage tolerance DC operated Pick-up voltage 0.8 - 1.1 Power consumption DC operation Power consumption Pick-up = Sealing VA/W Notes 2.
PAGE 5
380 V 415 V Ie A 3 500 V Ie A 1.5 DC L/R ≦ 15 ms Contacts in series: A 1 24 V A 2.5 2 60 V A 2.5 3 100 V A 1.5 3 220 V A 0.5 Conv. thermal current Ith A 10 Control circuit reliability Failure rate λ <10 , < one failure at 100 million operations (at Ue = 24 V DC, Umin = 17 V, Imin = 5.4 mA) Operations x 10 6 0.2 Operations x 10 6 0.15 -8 Component lifespan at Ue = 240 V AC-15 DC current L/R = 50 ms: 2 contacts in series at Ie = 0.
PAGE 6
Rated operational current for speciﬁed heat dissipation In A 6.6 Heat dissipation per pole, current-dependent Pvid W 0.2 Equipment heat dissipation, current-dependent Pvid W 0.6 Static heat dissipation, non-current-dependent Pvs W 2.3 Heat dissipation capacity Pdiss W 0 Operating ambient temperature min. °C -25 Operating ambient temperature max. °C 50 IEC/EN 61439 design veriﬁcation 10.2 Strength of materials and parts 10.2.
PAGE 7
Approvals Product Standards IEC/EN 60947-4-1; UL 508; CSA-C22.2 No. 14-05; CE marking UL File No. E29096 UL Category Control No. NLDX CSA File No. 012528 CSA Class No. 3211-04 North America Certiﬁcation UL listed, CSA certiﬁed Specially designed for North America No Characteristics 1: Overload relay 2: Suppressor 3: Auxiliary contact modules Enclosure totally insulated 06/16/2021 Eaton 051650 ED2021 V80.
PAGE 8
Switching duty for non-motor loads, 3-pole, 4-pole Operating characteristics Non-inductive or slightly inductive loads Electrical characteristics Make: 1 x rated current Break: 1 x rated current Utilization category 100 % AC-1 Typical applications Electric heat 06/16/2021 Eaton 051650 ED2021 V80.
PAGE 9
Short-time loading, 3-pole Time interval between two loading cycles: 15 minutes Dimensions 06/16/2021 Eaton 051650 ED2021 V80.
PAGE 10
2DILE-… + MVDILE + …DILE 2DILE-…-G + MVDILE + …DILE 2DILE-… + MVDILE + …DILE 2DILE-…-G + MVDILE + …DILE 2DILE-… + MVDILE 2DILE-…-G + MVDILE 06/16/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 051650 ED2021 V80.