RFW-201 User’s Guide Document Number CUG RFW-201 Revision 1 Eaton’s Cooper Power Systems 910 Clopper Road, Suite 201S Gaithersburg, MD 20878 USA www.eaton.
Contents 1 About the RFW-201 ................................................................................................................................ 3 2 Regulatory Notices................................................................................................................................. 4 3 RFW-201 Specifications ........................................................................................................................
1 About the RFW-201 The RFW-201 is a radio communications device designed for use in water meters. The RFW-201 provides a 915 MHz radio interface to an RF mesh network. The RFW-201 operates from a 3.6V lithium battery. The supplied voltage is then regulated to 3.3VDC by the on-board power supply circuit. The radio module operates in license-free bands at 915 MHz (902.75 to 927.25 MHz). RFW-201 Nodes are fully compatible with mesh network hardware, protocols and operations.
2 Regulatory Notices Warning The Original Equipment Manufacturer (OEM) must ensure that FCC Labeling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the Eaton’s Cooper Power Systems FCC identifier (FCC ID: P9X-500LG) and IC Number (IC: 6766A500LG) as well as the FCC Notice below. This device complies with Part 15 of the FCC Rules.
Warning Warning The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb.
Transmitters with Detachable Antennas This device has been designed to operate with the antenna listed below, having a maximum gain of 2.4 dB. Antennas not included in this list or having a gain greater than 2.4 dB are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. Antennas that may be used with this product include: Warning Linx ¼ Wave through-hole helical – 2.
3 RFW-201 Specifications Radio Specifications Operating frequency 902.75 – 927.25 MHz Reliable data transmission Error detection, correction and retransmission RF output power 20 dBm (maximum) to -20 dBm Data rate 9.6 kb/s, 19.2 kb/s, 38.4 kb/s, 76.8 kb/s, 153.6 kb/s Receiver sensitivity -114 dBm (@ 1.0% PER, 9.
Eaton’s Cooper Power Systems 910 Clopper Raod, Suite 201S Gaithersburg, MD 20878 USA www.eaton.