User Manual 1
Functions & Features The digital camcorder has various features and functions: l Digital Video l Digital camera (5 million pixels) l 2.
Brief Introduction on Appearance 1 2 3 4 5 6 7 8 3 9 10
11 12 14 13 15 16 17 (1) Shutter key (2)Shaft (3) Hang rope buckle (4) Display screen (5) AV port (6) TF card slot (7) USB port (8) Power key (9) Mode switch key (10) Menu key (11) Charger light (12)W key (13) T key(14) Loudspeaker (15) Lens (16) LED fill light (17) Microphone 4
Camera key press functions and indicators Press/Indicator Power key Shutter key T key Functions Turn the digital camcorder on/off Video mode, record video/stop recording, shooting mode, act as a shutter Digital enlargement and digital zoom, select document by pressing left (playing back mode). Press up to select menu. After opening menu, the volume will be turned up (when display video) Digital lessen and digital zoom, select document by pressing right W key (playing back mode).
─────────────────────────────────────────────── Note lTurn the power off before replacing the memory card. lInsert cards in correct direction. Do not insert cards with large force to avoid damaging cards or any part of the digital video. If failed, check whether the direction is correct. l Format any new memory card or the one used in other digital camcorders before using it in your digital video. ─────────────────────────────────────────────── Open Screen Open the LCD to let it face towards yourself.
Tap the center of the touch screen once to start recording; press it again to stop. Shoot In the shooting mode, press Shoot key to take photos. Tap the center of the touch screen once to start shooting. Self-timer mode: start countdown after pressing the Shoot key. Take one photo after delaying 2s or 10s.
Shutter key to play. Press this key again to stop playing. During playing, press OK key to suspend, and then press such key again to continue playing. After selecting videos, tap tap icon to play it. Tap icon to continue playing. Tap or forwards respectively. Tap icon or key to suspend playing; icon to skip backwards icon to stop playing. In the playing back mode, press DISP key once to playback the vehicle-mounted loop video recording (vehicle travel records).
NOTE lIf setting auto power off on "OFF", the camera will not power off automatically until the power is low. Menu Settings In the shooting/video recording/playing back modes, press Menu key to open the menu, and then press Up/Down/Left/Right key to select menus, then press OK key to enter sub-menu. When selecting menus, the background color of selected menu will display. Note: it is able to open menus by tapping icon on the touch screen in the shooting/video recording/playing back modes.
In the setting interface, press Left/Right keys to select items to be adjusted (date or time). The button icon will be shown on the up/down edges of selected items. Press Up/Down keys to adjust (or tap adjust). After adjustment, press OK key or tap to confirm. Finally, press Menu key (or tap or icons to icon on the screen icon on the screen) to exit from the setting mode. Connect Computers Before connecting with computers, install the digital camcorder driver by installation CDs.
Press Shutter key to start recording, and press such key again to stop recording. Tap the icon on the touch screen to open/close the LED fill light (the fill light is unavailable in the playing back mode). The information will be shown on the screen in the video recording modes. 1 2 3 4 5 6 10 7 8 9 No. 11 Icon Name Description It indicates that it is able to recording video 1 Video mode by pressing Shutter key in the video recording mode.
The free time indicates the remaining 5 Recording time available recording time; the recording time indicates the recorded time. 6 The 7 The TF card icon indicates to insert the memory card. power on/off for LED fill light Tap it on the touch screen to turn on/off LED fill light. Menu key on 8 The touch Tap it to open the menu. screen It indicates current power status. In red 9 Power color, it means the power is depleted, and the camera will turn off automatically.
Menu Settings for video recording Press Menu key to open Video recording. Press T/W key to select menus, and then press shutter key to enter sub-menus. Press Menu key or OK key to return to the main menu. Press T/W key to select, and the press SHUTTER key to confirm. After returning to the main menu, press Menu key to exit. It is possible to operate the settings for menus directly via the touch screen.
Auto It is fit for many conditions. Day light White balance Cloudy day Fluorescent lamp Tungsten lamp Normal Special effects is fit for day It is fit for cloudy circumstance. It is fit for fluorescent lamp circumstance. It is fit for tungsten lamp circumstance. Normal effect Black & White effect Return to the Return ancients effect Negative film light circumstance.
When shooting/video recording, the date will be Date print on the lower right corner of files. When Date & Time shooting/video recording, the date and time will be print on the lower right corner of files Shooting Mode After being turned on, the digital camcorder will enter the video recording mode automatically, please press Mode Switch key to enter the shooting mode. In the shooting mode, press Shutter key to take photos.
9 10 11 12 No. 1 2 3 4 5 6 7 Shooting 2 3 mode Description It indicates that it is able to take photos by pressing Shutter key in the shooting mode. Countdown It instructs the countdown for for self-timer self-timer. White It indicates the current settings for balance white balance. Metering 4 13 14 15 Icon Name 1 8 mode 5 Exposure 6 Picture size It indicates current metering mode. It indicates current exposure value.
7 Picture It indicates current selected picture quality quality. Available 8 numbers of photos 9 10 of photos available to be taken. It indicates current ISO setting. ISO The It indicates the remaining numbers power on/off for LED fill light Tap it on the touch screen to turn on/off LED fill light. Menu key on 11 the touch Tap it to open the menu. screen It indicates current power status.
instruction digital zoom. Menu setting for shooting mode Press Menu key to open Shooting menu. Press T/W key to select menus, and then press shutter key to enter sub-menus. Press Menu key or OK key to return to the main menu. Press T/W key to select, and the press SHUTTER key to confirm. After returning to the main menu, press Menu key to exit. It is possible to operate the settings for menus directly via the touch screen.
Normal Central metering Metering mode It subjects to the central area when metering Multi-spot It subjects to multi spots metering when metering Spot metering Auto It subjects to one spot when metering It is fit for many conditions. Day light White balance Normal picture quality Cloudy day Fluorescent lamp Tungsten lamp It is fit for day light circumstance. It is fit for cloudy circumstance It is fit for fluorescent lamp circumstance It is fit for tungsten lamp circumstance.
Use 2s 2s delayed self-timer mode. Use 10s the 10s delayed self-timer mode.
1 42 3 65 15 13 14 12 7 8 9 10 11 When Date & Time shooting/video recording, the date and time will be print on the lower right corner of files. ISO AUTO Set ISO value as Auto ISO 100 Set ISO value as 100 ISO 200 Set ISO value as 200 ISO 400 Set ISO value as 400 Playing Back Mode After being turned on, the digital camcorder will enter the video recording mode automatically. Press Mode key to enter shooting mode. Under photograph mode, press Mode key again to enter playing back mode.
2 3 Document protection Voice memo Indicates current document has been locked to protect. Indicates current document has added voice memo icon After enlarging photo, click four icons including up, down, left and right on screen to realize translational scan photo. 5 Menu Click the icon on screen to open menu 6 Video icon 7 Left icon Click this icon to select document to left. 8 9 grid icon Click this icon to enter 9: picture scan.
Menu Settings for Playing Back Mode Press Menu key to open the main menu, and then press Up/Down keys to select. Press OK key to enter the sub-menus. Press Menu key or OK key to return to the main menu. Press Up/Down keys to select, and then press OK key to confirm. After returning to the main menu, press Menu key to exit. Note: it is able to tap icon on the touch screen to open and set menus.
Loop Yes/No Add Add voice memo to photos Voice memo Delete Delete voice from photos Note: It is able to add voice memo up to 30s to every photo. In the playing back mode, photos with voice memo will have icon. Press OK key to start to play voice memo, during which press Up key to suspend playing or press Menu key to stop playing. Setting menu Under any mode (video, photograph or playing back), press Menu key to open menu, and then press Mode key to enter setting menu.
Main Menu Sub Menu Description Shutter On/off Starting up Sound No/1/2/3 tone Key tone On/off Volume Auto playback 0/1/2/3 Off No playback after shooting 1s Playback 1s after shooting 3s Playback 3s after shooting Set light source frequency as 50Hz 50HZ Power frequency Set light source frequency as 60Hz 60HZ Auto power off after being in idle 1 min status for 1 min. Auto power off after being in idle 3 min status for 3 min.
Date & Time Set date & time, together with the / date format English Set the menu language as English Français Set the menu language as French. Set Español Language Italiano Set Format settings language as the menu language as language as Portuguese. Set Deutsch Restore factory menu Set the menu language as Italian. Português TV the Spanish. the menu German. NTSC Set television system as NTSC PAL Set television system as PAL Yes/No Format the memory card.
directory “DCIM\100MEDIA” in the removable disk. It is able to enter such directory to copy files to your computer hard disk. ─────────────────────────────────────────────── Note: do not disconnect USB connection during files download. Do not insert or remove memory cards during USB connection to avoid data loss. ─────────────────────────────────────────────── Use Camera After connecting the digital camcorder with a computer, press Mode Switch key to enter the Camera mode.
Please ensure that selecting the Preview the menu of Option Installing driver and software The accessory CD contains the camera driver and provided software MAGIX Video easy SE / MAGIX Photo Manager MX (for photo and video processing). Installation interface Please insert the CD into the CD-ROM, the system will automatically run the installer in the CD, and the screen shows the installation wizard window as below. (The installer may take several seconds to start, depending on the PC performance.
Installing driver In the installation wizard window, click the “Install Driver” button and follow the wizard to install step by step. Please restart the PC after installing the driver. Run the software MAGIX Video easy SE / MAGIX Photo Manager MX, click the button in the wizard window and follow the prompt to install step by step. For usage, please click the “User Manual” button in the installation wizard window.
File format JPEG, AVI Video resolution FHD1920x1080 Self-timer delay 2 s / 10s Digital Zoom 8 times HD 1280X720 VGA 640×480 Auto / Sunny day / Cloudy day / Fluorescent lamp / Tungsten White balance lamp Exposure compensation -2.0 ~ +2.0 USB port USB2.0 TV output NTSC / PAL Display screen 2.7″resistive touch screen Power One 3.7V rechargeable lithium battery English/ Simplified Chinese/ French/ Language Portuguese/ German Focus distance f=5.8mm Aperture F2.
Note: the design specification of the product was formulated according to the latest information when compiling this instruction. There is no prior notice for any modification. Please refer to the actual digital video. FAQ The camera fails to start up after installing batteries There is not enough power, please replace batteries. Do not remove the battery package Install batteries in wrong direction. Please check whether the battery has been installed correctly.
DECLARATION OF CONFORMITY easypix herebly declares that the product DCV2712 is in conformity to all the essential requirements of Directive 1999/5/EC. The declaration of conformity can be downloaded here: http://www.easypix.info/download/pdf/doc_dvc2712.pdf For technical help please visit our support area on www.easypix.eu.