Instruction Manual

EasyIO FW-14 V3 - Instruction Manual

V1.01

Installation Guide on typical industrial 35mm DIN rail

Pull to Unlock the Clip Push to lock clip

Wiring Guide

WARNING: Class 2 Devices Wiring Only – Do Not Reclassify and Install as Class 1, 3 or Power and Lighting

Wiring

ATTENTION : Câblage destiné aux équipements de classe 2 seulement. Ne pas les reclasser ni les installer

avec un câblage de classe 1 ou de classe 3, ou avec un câblage d'alimentation ou d'éclairage.

DO1 ~ DO2 is a voltage free contact. External power source is needed either 24 Vac or 24 Vdc.

PAGE 1
EasyIO FW-14 V3 - Instruction Manual Installation Guide on typical industrial 35mm DIN rail Pull to Unlock the Clip Push to lock clip Wiring Guide WARNING: Class 2 Devices Wiring Only – Do Not Reclassify and Install as Class 1, 3 or Power and Lighting Wiring ATTENTION : Câblage destiné aux équipements de classe 2 seulement. Ne pas les reclasser ni les installer avec un câblage de classe 1 ou de classe 3, ou avec un câblage d'alimentation ou d'éclairage. DO1 ~ DO2 is a voltage free contact.
PAGE 2
EasyIO FW-14 V3 - Instruction Manual Input Rating (UL Listing) Type Supply Universal Inputs Rating 24Vac(+/-5%), 20VA; 24Vdc(+15%/-15%), 15VA, Class 2 Voltage: 0-10 Vdc Class 2; Resistance: 500-500K Ohms Terminal H (Vcc), G (Ground) UI1 ~ 8 and COM (8 sets) Output Rating (UL Listing) Type Digital Outputs (SPST N.O. dry contact) Universal Output Rating 24 Vac, 0.5 A pilot duty, Class 2; 24 Vac, 2 A General Purpose, Class 2; 24 Vdc, 2 A, Class 2; 24 Vdc, 0.
PAGE 3
EasyIO FW-14 V3 - Instruction Manual FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.